PCA5097H中文資料飛利浦?jǐn)?shù)據(jù)手冊(cè)PDF規(guī)格書(shū)

INTRODUCTION

This data sheet details the specific features of the: PCD5090/xxx; DSP-ROM, with external ROM PCA5097/xxx; DSP-ROM, with Field Electronically Erasable Programmable Read Only Memory (FEEPROM).

FEATURES

General

? The PCx509x is designed for GAP-compliant handsets and simple base stations

? Embedded 80C51 microcontroller with twice the performance of the classic architecture, up to 128 kbytes external memory or 64 kbytes FEEPROM program memory and 3 kbytes of data memory on chip. In addition there is 1 kbyte of on-chip data memory that is shared with on-chip Burst Mode Logic (BML) and DSP, the System Data RAM (SDR).

? 80C51 ports P0, P1, P2 and P3 available for interfacing to display, keyboard, I2C-bus, interrupt sources and/or external memory. External program memory is addressable up to 128 kbytes (PCD5090/xxx and PCA5097/xxx).

? Portable Part (PP) and Fixed Part (FP) modes

? TDMA frame (de)multiplexing; transmission or reception can be programmed for any slot

? Ciphering, scrambling, CRC checking/generation, protected B-fields

? Speech and data buffering space for six handsets

? Local call and B-field loop-back

? Two interrupt lines for BML and DSP to interrupt 80C51

? On-chip, three-channel time-multiplexed 8-bit Analog-to-Digital Converter (ADC) for RSSI measurement and battery voltage measurement. One channel available for other purposes.

? On-chip 8-bit DAC for frequency adjustment of 13.824 MHz on-chip crystal oscillator

? Phase error measurement and phase error correction by hardware

? Digital-to-Analog Converters (DACs) and ADCs for dynamic earpiece and dynamic or electret microphone

? On-chip reference voltage

? On-chip supply for electret microphone

? Very low ohmic buzzer output

? Serial interface to external ADPCM CODEC (PCD5032)

? IOM-2interface (Siemens registered trademark)

? Serial interface to synthesizer for frequency programming

? Programmable timing of radio-control signals

? Programmable polarity of radio-control signals

? Easy interfacing with radio circuits, operating at other supply voltage

? Programmable GMSK pulse shaper

? On-chip comparator for use as bit-slicer

? Power-on reset

? Low supply voltage (2.7 to 5.5 V)

? SACMOS technology.