ZL8800開發(fā)板套件編程器的評(píng)估板-DC/DC與AC/DC（離線）SMPS規(guī)格書PDF中文資料

The ZL8800 is a dual output or dual phase digital DC/DC

controller. Each output can operate independently or be used

together in a dual phase configuration for high current

applications.

The ZL8800 supports a wide range of output voltages

(0.54V to 5.5V) operating from input voltages as low as 4.5V

up to 14V.

With the fully digital ChargeMode? Control the ZL8800 will

respond to a transient load step within a single switching cycle.

This unique compensation-free modulation technique allows

designs to meet transient specifications with minimum output

capacitance thus saving cost and board space.

Intersil’s proprietary single wire DDC (Digital-DC?) serial bus

enables the ZL8800 to communicate between other Intersil

ICs. By using the DDC, the ZL8800 achieves complex functions

such as inter-IC phase current balancing, sequencing and fault

spreading, eliminating complicated power supply managers

with numerous external discrete components.

The ZL8800 features cycle-by-cycle output overcurrent

protection. The input voltage, output voltages and

DrMOS/MOSFET driver supply voltages are overvoltage and

overvoltage protected. Two external and one internal

temperature sensor are available for temperature monitoring,

one of which is used for under and over-temperature

protection. A snapshot parametric capture feature allows

users to take a snapshot of operating and fault data during

normal or fault conditions.

Integrated Low Dropout (LDO) regulators allow the ZL8800 to

be operated from a single input supply eliminating the need

for additional linear regulators. The LDO output can be used to

power external drivers or DrMOS devices.

With full PMBus? compliance the ZL8800 is capable of

measuring and reporting input voltage, input current, output

voltage, output current as well as the device’s internal

temperature, 2 external temperatures and an auxiliary voltage

input.

Features

? Unique compensation-free design – always stable

? Output voltage range: 0.54V to 5.5V

? Input voltage range: 4.5V to 14V

? 1 Output Voltage accuracy over line, load and temperature

? ChargeMode control achieves fast transient response,

reduced output capacitance and provides output stability

without compensation.

? Switching frequency range 200kHz to 1.33MHz

? Proprietary single wire DDC (Digital-DC) serial bus enables

voltage sequencing and fault spreading with other Intersil

ICs

? Tracking of an external power supply

? Cycle-by-cycle inductor peak current protection

? Digital fault protection for output voltage UV/OV, input

voltage UV/OV, temperature and MOSFET driver voltage

? 10-bit average output current measurement with adjustable

gain settings for sensing with high current, low DCR

inductors

? 10-bit monitor ADC measures input voltage, input current,

output voltage, internal, external temperature, driver voltage

? Configurable to use stand-alone MOSFET drivers or

integrated Driver-MOSFET (DrMOS) devices

? Nonvolatile memory for storing operating parameters and

fault events.

? PMBus? compliant

Applications

? Servers/storage equipment

? Telecom/datacom equipment

? Power supplies (memory, DSP, ASIC, FPGA)