UG-1047中文資料亞德諾數(shù)據(jù)手冊PDF規(guī)格書

GENERAL DESCRIPTION

The EVAL-ADA4571-2 shows the ADA4571-2 in an end of shaft magnet configuration. The evaluation kit is composed of an ADA4571-2 motherboard, a magnetic stimulus on a hand turnable mount, a USB interface, and an SDP-S controller board. The required LabVIEW 2013 graphical user interface (GUI) software for Windows? is available on the ADA4571-2 product page.

The EVAL-ADA4571-2 features an on-board 5 V regulator, a 6-channel simultaneous sampling analog-to-digital converter (ADC), and jumpers for enabling the temperature compensation and power-down modes within the ADA4571-2. The motherboard also features test points and unpopulated coaxial connectors for the six outputs of the device.

The SDP-S controller board controls the ADC on the motherboard reading back the ADA4571-2 outputs, to change the digital inputs to the ADA4571-2, interface with the GUI, and to supply power to the evaluation board through the USB connection.

FEATURES

USB 2.0 interface

Jumper or computer controlled temperature compensation mode enable

Jumper or computer controlled power-down mode enable

Measurement test points and coaxial connectors

EVALUATION KIT CONTENTS

ADA4571-2 magnetic stimulus

Dipole magnet

Hand movable mounting

Read back electronics

ADDITIONAL EQUIPMENT NEEDED

6 V to 12 V bench supply (optional)

SDP-S controller board

USB cable (supplied with the SDP-S controller board)

LabVIEW 2013 software downloadable from ADA4571-2 product page