TSV914AQDRQ1中文資料德州儀器數(shù)據(jù)手冊PDF規(guī)格書

1 Features

? Rail-to-rail input and output

? Low noise: 18 nV/√Hz at 1 kHz

? Low power consumption: 550 μA (typical)

? High-gain bandwidth: 8 MHz

? Operating supply voltage from 2.5 V to 5.5 V

? Low input bias current: 1 pA (typical)

? Low input offset voltage: 1.5 mV (maximum)

? Low offset voltage drift: ±0.5 μV/°C (typical)

? ESD internal protection: ±4-kV human-body model

(HBM)

? Extended temperature range: –40°C to 125°C

2 Applications

? Optimized for AEC-Q100 grade 1 applications

? Infotainment and cluster

? Passive safety

? Body electronics and lighting

? HEV/EV inverter and motor control

? On-board (OBC) and wireless charger

? Powertrain current sensor

? Advanced driver assistance systems (ADAS)

? Single-supply, low-side, unidirectional currentsensing

circuit

3 Description

The TSV91xA-Q1 family, which includes single-,

dual-, and quad-channel operational amplifiers (op

amps), is specifically designed for general-purpose

automotive applications. Featuring rail-to-rail input

and output (RRIO) swings, wide bandwidth (8

MHz), and low offset voltage (0.3 mV, typical), this

family is designed for a variety of applications that

require a good balance between speed and power

consumption. The op amps are unity-gain stable and

feature an ultra-low input bias current, which enables

the family to be used in applications with high-source

impedance. The low input bias current allows the

devices to be used for sensor interfaces, and active

filtering.

The robust design of the TSV91xA-Q1 provides easeof-

use to the circuit designer. Features include a

unity-gain stable, integrated RFI-EMI rejection filter,

no phase reversal in overdrive condition, and high

electrostatic discharge (ESD) protection (4-kV HBM).