TSS622工業(yè)自動化與控制的延時繼電器規(guī)格書PDF中文資料

Description

The TSS Series is a totally solid-state timing module. Its 1A

rated, solid-state output provides an excellent method of

time control for exposures, dispensing, or for increasing or

decreasing a switch closure. Time delays from 0.05 to 600

seconds, in 4 ranges, cover 90 of all OEM applications.

Factory calibration of fixed delays is ±5 and the repeat

accuracy is ±2. The TSS Series can be surface mounted with

a single screw, or snapped on a 35mm DIN rail using the

P1023-20 accessory adaptor.

Operation (Single Shot)

Voltage must be applied before and during timing. Upon

momentary or maintained closure of the initiate switch, the

output energizes for a measured interval of time. At the end

of the delay, the output de-energizes. Opening or reclosing the

initiate switch during timing has no affect on the time delay. The

output will energize if the initiate switch is closed when input

voltage is applied.

Reset: Reset occurs when the time delay is complete and the

initiate switch opens. Loss of input voltage resets the time delay

and output.

FEATURES BENEFITS

Analog circuitry Repeat accuracy + / - 2,

Factory calibration + / - 5

Compact, low

cost design Allows flexiblility for OEM applications

Totally solid state

and encapsulated

No moving parts to arc and wear out over time and

encapsulated to protect against shock, vibration,

and humidity

Surface or DIN

rail mounting Provides flexibility for installation