TPSM843620E中文資料德州儀器數據手冊PDF規(guī)格書

1 Features

? Fixed-frequency, internally-compensated advanced

current mode (ACM) control

? Small form factor 3.5mm × 3.5mm × 1.6mm,

15-pin DFM package MicroSiP power module

? High-efficiency, integrated 25mΩ and 6.5mΩ

MOSFETs, inductor and basic passives

? 4V to 18V input voltage range

? 0.5V to 5.5V output voltage range

? Three selectable PWM ramp options to optimize

the control loop performance

? Five selectable switching frequencies: 500kHz,

750kHz, 1MHz, 1.5MHz, and 2.2MHz

? Synchronizable to an external clock

? 0.5V, ±0.5 voltage reference accuracy over full

temperature range

? Selectable soft-start times: 0.5ms, 1ms, 2ms, and

4ms

? Monotonic start-up into prebiased outputs

? Selectable current limits to support lower current

operation

? Enable with adjustable input undervoltage lockout

? Power-good output monitor

? Output overvoltage, output undervoltage, input

undervoltage, overcurrent, and overtemperature

protection

? Pin-to-pin compatible with 8A - TPSM843820E 3A

- TPSM843320E

? – 55°C to 125°C operating junction temperature

2 Applications

? Wireless infrastructure and wired communications

equipment

? Optical module

? Test and measurement

? Medical and healthcare

? Aerospace and defense

3 Description

TPSM843620E is a highly efficient, small, and

flexible synchronous step-down DC-DC converter in

a MicroSiP power module package that is easy to

use. The module operates up to 18V input with fixedfrequencies

that are resistor adjustable by system

designer. The embedded IC is internally compensated

which reduces external components and design size.

The integrated high-frequency capacitor reduces the

transient peak at switching node.

The TPSM843620E module employs an internally

compensated, fixed-frequency advanced current

mode control. The device is capable of providing

high efficiency while running at a switching frequency

up to 2.2MHz. The fixed frequency controller

can operate from 500kHz to 2.2MHz and can

be synchronized to an external clock using the

SYNC pin. Additional features include a high

accuracy voltage reference, selectable soft-start

times, monotonic start-up into prebiased outputs,

selectable current limits, adjustable UVLO through the

EN pin, and a full suite of fault protections.