1 Features

? AEC-Q100 qualified for automotive applications:

– Temperature grade 1: –40°C to +125°C, TA

? Device junction temperature: –40°C to +150°C, TJ

? Input voltage range: 1.7 V to 6.0 V

? Available output voltages:

– Adjustable option: 1.2 V to 5.5 V

– Fixed options: 0.65 V to 5.0 V

? Output accuracy: 0.5 typical, 1.7 maximum

? Low IQ: 25 μA (typical)

? Ultra-low dropout:

– 315 mV (max) at 1 A (3.3 VOUT)

? Internal 550 μs soft-start time to reduce inrush

current

? Active output discharge

? Packages:

– 3-mm × 3-mm wettable flank VSON (8)

– 5-pin TO-252, RθJA = 31.6°C/W

2 Applications

? Automotive head units

? Hybrid instrument clusters

? Telematics control units

? Medium- and short-range radar

? DC/DC converters

3 Description

The TPS785-Q1 ultra low-dropout regulator (LDO) is

a small, low quiescent current LDO that can source

1 A with excellent line and load transient performance.

The low output noise and great PSRR performance

make the device suitable to power-sensitive analog

loads. The TPS785-Q1 is a flexible device for post

regulation because this device supports an input

voltage range from 1.7 V to 6.0 V and offers an

adjustable output range of 1.2 V to 5.5 V. The device

also features fixed output voltages from 0.65 V to

5.0 V for powering common voltage rails.

The TPS785-Q1 offers foldback current limit to reduce

power dissipation during a over current condition. The

EN input helps with power sequencing requirements

of the system. The internal soft-start provides a

controlled start up reducing the inrush current allowing

for lower input capacitance to be used.

The TPS785-Q1 provides an active pulldown circuit to

quickly discharge output loads when disabled.

TPS78533QWDRBRQ1屬于集成電路（IC） > 線性 + 開關穩壓器。美國德州儀器公司制造生產的TPS78533QWDRBRQ1穩壓器 - 線性線性穩壓器用于提供穩定的輸出電壓，無論負載電流、輸入電壓或環境因素如何變化，這些輸出電壓通常都要保持不變。它們的工作原理要求輸入電壓維持在高于所需的輸出電壓，而且要超出某個最小量，并且在工作時會將輸入端的任何多余電壓轉換為熱量。對于大多數應用而言，雖然這種穩壓器的效率低于開關模式的穩壓器，但它們通常更適合對噪聲高度敏感的應用。