TK11150S中文資料Toko數據手冊PDF規格書

DESCRIPTION

The TK111xxS is a low dropout linear regulator with a built-in electronic switch. The internal switch can be controlled by TTL or CMOS logic levels. The device is in the “on” state when the control pin is pulled to a logic high level. An external capacitor can be connected to the noise bypass pin to lower the output noise level to 30 μVrms.

An internal PNP pass transistor is used to achieve a low dropout voltage of 85 mV (typ.) at 30 mA load current. The TK111xxS has a very low quiescent current of 140 μA (typ.) at no load . The standby current is 100 nA maximum. The internal thermal shut down circuitry limits the junction temperature to below 150 °C. The load current is internally monitored and the device will shut down in the presence of a short circuit or overcurrent condition at the output.

The TK111xxS is available in a miniature SOT-23-5 surface mount package.

FEATURES

■ High Voltage Precision at ± 2.0 or ± 60 mV

■ Active High On/Off Control

■ Very Low Dropout Voltage (85 mV at 30 mA)

■ Very Low Noise

■ Miniature Package (SOT-23-5)

■ Internal Thermal Shutdown

■ Short Circuit Protection

■ Excellent Ripple Rejection (70 dB @ 1 kHz)

■ Reverse Bias Protection

APPLICATIONS

■ Battery Powered Systems

■ Cellular Telephones

■ Pagers

■ Personal Communications Equipment

■ Portable Instrumentation

■ Portable Consumer Equipment

■ Radio Control Systems

■ Toys