General description

The TJA1081G is a FlexRay transceiver that is fully compliant with FlexRay electrical

physical layer specification ISO 17458-4:2013 (see Ref. 1 and Ref. 2). It is intended for

communication systems from 2.5 Mbit/s to 10 Mbit/s and provides an advanced interface

between the protocol controller and the physical bus in a FlexRay network.

The TJA1081G features enhanced low-power modes, optimized for ECUs that are

permanently connected to the battery.

The TJA1081G provides differential transmit capability to the network and differential

receive capability to the FlexRay controller. It offers excellent EMC performance as well as

effective ESD protection.

The TJA1081G actively monitors system performance using dedicated error and status

information (that any microcontroller can read), along with internal voltage and

temperature monitoring.

The TJA1081G supports mode control as used in the TJA1080A (see Ref. 3) and is fully

functionally and pin compatible with the TJA1081B (see Ref. 4).

Features and benefits

Optimized for time triggered communication systems

? Compliant with ISO 17458-4:2013 (see Ref. 2)

? Automotive product qualification in accordance with AEC-Q100

? Data transfer rates from 2.5 Mbit/s to 10 Mbit/s

? Very low ElectroMagnetic Emissions (EME) to support unshielded cable, meeting

latest industry standards

? Differential receiver with wide common-mode range for high ElectroMagnetic Immunity

(EMI), meeting latest industry standards

? Enhanced EMC performance compared with TJA1081B

? Auto I/O level adaptation to host controller supply voltage VIO

? Can be used in 14 V, 24 V and 48 V powered systems

? Instant transmitter shut-down interface (via BGE pin)

? Independent power supply ramp-up for VBAT, VCC and VIO

Low-power management

? Low-power management including inhibit switch

? Very low current in Sleep and Standby modes? VBAT operating range: 4.75 V to 60 V

? Gap-free specification

? Local and remote wake-up

? Supports remote wake-up via dedicated data frames

? Wake-up source recognition

Diagnosis (detection and signaling)

? Enhanced supply monitoring of VBAT, VCC and VIO

? Overtemperature detection

? Short-circuit detection on bus lines

? VBAT power-on flag (first battery connection and cold start)

? Clamping diagnosis on pin TXEN

? BGE status feedback

Protection

? Bus pins protected against ?6 kV ESD pulses according to IEC 61000-4-2 and HBM

? Pins VBAT and WAKE protected against ?6 kV ESD pulses according to

IEC 61000-4-2

? Bus pins protected against transients in automotive environment (according to

ISO 7637 class C)

? Bus pins short-circuit proof to battery voltage (14 V, 24 V and 48 V) and ground

? Fail-silent behavior in the event of an undervoltage on pins VBAT, VCC or VIO

? Passive behavior of bus lines while the transceiver is not powered

? No reverse currents from the digital input pins to VIO or VCC when the transceiver is not powered

Functional classes according to FlexRay electrical physical layer

specification (see Ref. 2)

? Bus driver voltage regulator control

? Bus driver - bus guardian interface

? Bus driver logic level adaptation

? Bus driver remote wake-up

TJA1081G屬于集成電路（IC） > 專用。恩智浦半導體公司制造生產的TJA1081G專用該系列產品可提供所需的功能，用以將信息源/信宿連到各種復雜或范圍狹窄應用中的傳感器、變送器、致動器、傳輸介質或其他此類端點。例如，汽車安全氣囊驅動器、車身控制和信息娛樂總線、自適應電纜均衡器、智能卡等等。