TDA1313T中文資料飛利浦?jǐn)?shù)據(jù)手冊(cè)PDF規(guī)格書(shū)

GENERAL DESCRIPTION

The TDA1313; 1313T is a voltage driven digital-to-analog converter, and is of a new generation of DACs which incorporates the innovative technique of Continuous Calibration (CC). The largest bit-currents are repeatedly generated from one single current reference source. This duplication is based upon an internal charge storage principle having an accuracy which is insensitive to ageing, temperature and process variations.

The TDA1313; 1313T is fabricated in a 1.0 μm CMOS process and features an extremely low power dissipation, small package size and easy application. Furthermore, the accuracy of the intrinsic high coarse-current combined with the implemented symmetrical offset decoding method preclude zero-crossing distortion and ensures high quality audio reproduction. Therefore, the CC-DAC is eminently suitable for use in (portable) digital audio equipment.

FEATURES

? 4/8 × oversampling (multiplexed/simultaneous input) possible

? Voltage output (capable of driving headphone)

? Space saving package (SO16 or DIL16)

? Low power consumption

? Wide dynamic range (16-bit resolution)

? Continuous Calibration concept

? Easy application:

– single 3 to 5.5 V supply rail

– output voltage is proportional to the supply voltage

– integrated current-to-voltage converter

? Internal bias current ensures maximum dynamic range

? Wide operating temperature range (?40 °C to +85 °C)

? Compatible with most current Japanese input format

multiplexed/simultaneous, twos complement and

CMOS)

? No zero crossing distortion

? Cost efficient

? High signal-to-noise ratio

? Low total harmonic distortion.