TCA9536集成電路（IC）的I/O擴展器規格書PDF中文資料

TCA9536屬于集成電路（IC）的I/O擴展器。由德州儀器制造生產的TCA9536I/O 擴展器該系列器件可與微控制器、微處理器或類似器件結合使用，目的是增加可用于連接外設的信號連接數量。典型的工作概念涉及使用串行通信，只需主機設備上的幾根 I/O 線，即可讀/寫擴展器設備上的許多輸入/輸出引腳的狀態。該技術的通信速度不佳，但連通性較高，最適合快速響應不是很關鍵的應用，例如許多人機界面應用。

1 Features

? I2C to GPIO expander

? Operating power-supply voltage range of 1.65 V to

5.5 V

? 5-V Tolerant I/O ports

? Software Reset via I2C General Call

? Software-enabled integrated pull-up resistors on P

ports

? P3 can be repurposed as INT output

? 1-MHz Fast mode plus I2C bus

? Input and output configuration register

? Polarity inversion register

? Internal power-on reset

? Power-up with all channels configured as inputs

? Noise filter on SCL and SDA inputs

? Latched outputs with high-current drive maximum

capability for directly driving LEDs

? ESD protection exceeds JESD 22

– 2000-V Human-body model (A114-A)

– 1000-V Charged-device model (C101)

2 Applications

? Personal electronics

– Wearables

– Mobile phones

– Gaming consoles

? Servers

? Routers

3 Description

The TCA9536 is a 4-bit I/O expander for the I2C bus

and is designed for 1.65-V to 5.5-V VCC operation.

It provides general-purpose remote I/O expansion for

most microcontroller families via the I2C interface.

The system controller can enable the I/Os as either

inputs or outputs by writing to the I/O configuration

register bits. The data for each input or output is

kept in the corresponding input or output register. The

polarity of the Input Port register can be inverted with

the Polarity Inversion register. There is an additional

special function register that can be used to disable

the internal pull-up resistors and P3 override to an INT

output.

The TCA9536 open-drain interrupt output (when

P3 is configured as INT in the special function

register) is activated when any input differs from its

corresponding Input Port register state and is used to

indicate to the system controller that an input state

has changed.

The system processor can reset the TCA9536 in the

event of a timeout or other improper operation by

using an I2C soft reset command, which puts the

registers in their default state.