GENERAL DESCRIPTION

The SX1239 is a highly integrated RF receiver capable of operation over a wide frequency range, including the 433, 868 and 915 MHz license-free ISM (Industry Scientific and Medical) frequency bands. Its highly integrated architecture allows for a minimum of external components whilst maintaining maximum design flexibility. All major RF communication parameters are programmable and most of them can be dynamically set. The SX1239 offers the unique advantage of programmable narrow-band and wide-band communication modes without the need to modify external components. The SX1239 is optimized for low power consumption while offering high sensitivity and channelized operation. TrueRF? technology enables a lowcost external component count (elimination of the SAW filter) whilst still satisfying ETSI and FCC regulations.

KEY PRODUCT FEATURES

◆ High Sensitivity: down to -120 dBm at 1.2 kbps

◆ High Selectivity: 16-tap FIR Channel Filter

◆ Bullet-proof front end: IIP3 = -18 dBm, IIP2 = +35 dBm, 80 dB Blocking Immunity, no Image Frequency response

◆ Low current: Rx = 16 mA, 100nA register retention

◆ Constant RF performance over voltage range of chip

◆ FSK Bit rates up to 300 kb/s

◆ Fully integrated synthesizer with a resolution of 61 Hz

◆ FSK, GFSK, MSK, GMSK and OOK demodulation

◆ Built-in Bit Synchronizer performing Clock Recovery

◆ Incoming Sync Word Recognition

◆ 115 dB+ Dynamic Range RSSI

◆ Automatic RF Sense with ultra-fast AFC

◆ Packet engine with CRC, AES-128 encryption and 66-byte FIFO

◆ Built-in temperature sensor and Low Battery indicator

APPLICATIONS

◆ Automated Meter Reading

◆ Wireless Sensor Networks

◆ Home and Building Automation

◆ Wireless Alarm and Security Systems

◆ Industrial Monitoring and Control

SX1239IMLTRT屬于RF/IF，射頻/中頻和 RFID > 射頻接收器。Semtech Corporation制造生產的SX1239IMLTRT射頻接收器RF 接收器用于接收已調制的射頻信號并對其進行解調，然后將數據傳送到系統中進行處理。頻率范圍是 AM、FM、WB、0 Hz 至 64 GHz，數據速率為 250 bps 至 16 Gbps，數據接口包括連接器、I2C、I2S、引腳焊盤、并行、PCB、串行、焊盤、SPI、UART 和 USB。