STTS2002集成電路（IC）的熱管理規格書PDF中文資料

STTS2002屬于集成電路（IC）的熱管理。由意法半導體集團制造生產的STTS2002熱管理熱管理 IC 是根據溫度控制電路電源的半導體器件。這些 IC 的功能包括風扇控制、硬件監控器、溫度監控系統、熱監控器、熱電偶放大器、熱電偶調節器和溫度計–溫控器。檢測溫度范圍為 -260℃ 至 +1800℃，輸出類型有 I2C、SMBus、低電平有效/高電平有效、模擬電壓、開漏、PWM、SPI、2 線串行和并行–串行。

Description

The STTS2002 is targeted for DIMM modules in mobile personal computing platforms (laptops), servers and other industrial applications. The thermal sensor (TS) in the STTS2002 is compliant with the JEDEC specification TSE2002a2, which defines memory module thermal sensors requirements for mobile platforms. The 2 Kbit serial presence detect (SPD) I2C-compatible electrically erasable programmable memory (EEPROM) in the STTS2002 is organized as 256 x8 bits and is functionally identical to the industry standard M34E02.

Features

■ STTS2002 is a 2.3 V memory module temperature sensor with 2 Kb SPD EEPROM forward compatible with JEDEC standard TSE 2002a2 and backward compatible with STTS424E02

■ Operating temperature range:

– –40 °C to +125 °C

■ Single supply voltage: 2.3 V to 3.6 V

■ 2 mm x 3 mm TDFN8, height: 0.80 mm (max)(a)

■ RoHS compliant, halogen-free

Temperature sensor

■ Temperature sensor resolution: programmable (9-12 bits) 0.25 °C (typ)/LSB - (10-bit) default

■ Temperature sensor accuracy (max):

– ± 1 °C from +75 °C to +95 °C

– ± 2 °C from +40 °C to +125 °C

– ± 3 °C from –40 °C to +125 °C

■ ADC conversion time: 125 ms (max) at default resolution (10-bit)

■ Typical operating supply current: 160 μA (EEPROM standby)

■ Temperature hysteresis selectable set points from: 0, 1.5, 3, 6.0 °C

■ Supports SMBus timeout 25 ms - 35 ms

2 Kb SPD EEPROM

■ Functionality identical to ST’s M34E02 SPD EEPROM

■ Permanent and reversible software data protection for the lower 128 bytes

■ Byte and page write (up to 16 bytes)

■ Self-time WRITE cycle (5 ms, max)

■ Automatic address incrementing

Two-wire bus

■ Two-wire SMBus/I2C - compatible serial interface

■ Supports up to 400 kHz transfer rate

■ Does not initiate clock stretching