STM32L443VC

帶FPU的超低功耗80 Mhz Arm Cortex-M4 MCU，具有256-KB Flash存儲(chǔ)器、LCD、USB、AES-256和DFSDM; ? Ultra-low-power with FlexPowerControl \n ?1.71 V to 3.6 V power supply \n ?-40 °C to 85/105/125 °C temperature range \n ?200 nA in VBAT mode: supply for RTC and 32x32-bit backup registers \n ?8 nA Shutdown mode (5 wakeup pins) \n ?28 nA Standby mode (5 wakeup pins) \n ?280 nA Standby mode with RTC \n ?1.0 μA Stop 2 mode, 1.28 μA with RTC \n ?84 μA/MHz run mode \n ?Batch acquisition mode (BAM) \n ?4 μs wakeup from Stop mode \n ?Brown out reset (BOR) \n ?Interconnect matrix \n? Core: Arm? 32-bit Cortex?-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator?) allowing 0-wait-state execution from Flash memory, frequency up to 80 MHz, MPU, 100DMIPS and DSP instructions \n? Performance benchmark \n ?1.25 DMIPS/MHz (Drystone 2.1) \n ?273.55 CoreMark? (3.42 CoreMark/MHz @ 80 MHz) \n? Energy benchmark \n ?347 ULPMark? CP score \n ?121 ULPMark? PP score \n? Clock Sources \n ?4 to 48 MHz crystal oscillator \n ?32 kHz crystal oscillator for RTC (LSE) \n ?Internal 16 MHz factory-trimmed RC (±1%) \n ?Internal low-power 32 kHz RC (±5%) \n ?Internal multispeed 100 kHz to 48 MHz oscillator, auto-trimmed by LSE (better than ±0.25 % accuracy) \n ?Internal 48 MHz with clock recovery \n ?2 PLLs for system clock, USB, audio, ADC \n? Up to 83 fast I/Os, most 5 V-tolerant \n? RTC with HW calendar, alarms and calibration \n? LCD 8× 40 or 4× 44 with step-up converter \n? Up to 21 capacitive sensing channels: support touchkey, linear and rotary touch sensors \n? 11x timers: 1x 16-bit advanced motor-control, 1x 32-bit and 2x 16-bit general purpose, 2x 16-bit basic, 2x low-power 16-bit timers (available in Stop mode), 2x watchdogs, SysTick timer? Memories \n ?256 KB single bank Flash, proprietary code readout protection \n ?64 KB of SRAM including 16 KB with hardware parity check \n ?Quad SPI memory interface \n? Rich analog peripherals (independent supply) \n ?1x 12-bit ADC 5 Msps, up to 16-bit with hardware oversampling, 200 μA/Msps \n ?2x 12-bit DAC output channels, low-power sample and hold \n ?1x operational amplifier with built-in PGA \n ?2x ultra-low-power comparators \n? AES: 128/256-bit key encryption hardware accelerator \n? 17x communication interfaces \n ?USB 2.0 full-speed crystal less solution with LPM and BCD \n ?1x SAI (serial audio interface) \n ?3x I2C FM+(1 Mbit/s), SMBus/PMBus \n ?4x USARTs (ISO 7816, LIN, IrDA, modem) \n ?1x LPUART (Stop 2 wake-up) \n ?3x SPIs (and 1x Quad SPI) \n ?CAN (2.0B Active) and SDMMC interface \n ?SWPMI single wire protocol master I/F \n ?IRTIM (Infrared interface) \n? 14-channel DMA controller \n? True random number generator \n? CRC calculation unit, 96-bit unique ID \n? Development support: serial wire debug (SWD), JTAG, Embedded Trace Macrocell? \n? All packages are ECOPACK2? compliant;

The STM32L443xx devices are the ultra-low-power microcontrollers based on the high-performance Arm? Cortex?-M4 32-bit RISC core operating at a frequency of up to 80 MHz. The Cortex-M4 core features a Floating point unit (FPU) single precision which supports all Arm? single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.\n\n The STM32L443xx devices embed high-speed memories (256 Kbyte of Flash memory, 64 Kbyte of SRAM), a Quad SPI flash memories interface (available on all packages) and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix.\n\n The STM32L443xx devices embed several protection mechanisms for embedded Flash memory and SRAM: readout protection, write protection, proprietary code readout protection and Firewall.\n\n The devices offer a fast 12-bit ADC (5 Msps), two comparators, one operational amplifier, two DAC channels, an internal voltage reference buffer, a low-power RTC, one general-purpose 32-bit timer, one 16-bit PWM timer dedicated to motor control, four general-purpose 16-bit timers, and two 16-bit low-power timers.\n\n In addition, up to 21 capacitive sensing channels are available. The devices also embed an integrated LCD driver 8x40 or 4x44, with internal step-up converter.\n\n They also feature standard and advanced communication interfaces.\n\n

STM32L443VC

Batch acquisition mode

STM32L443CC

Batchacquisitionmode

STM32L443RC

Batchacquisitionmode