STM32F413RH

帶DSP和FPU的高性能基本型系列ARM Cortex-M4 MCU，具有1,5 MB Flash、100 MHz CPU、ART加速器和DFSDM; ? Dynamic Efficiency Line with eBAM (enhanced Batch Acquisition Mode) \n ?1.7 V to 3.6 V power supply \n ?-40 °C to 85/105/125 °C temperature range \n? Core: Arm? 32-bit Cortex?-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator?) allowing 0-wait state execution from Flash memory, frequency up to 100 MHz, memory protection unit, 125 DMIPS/ 1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions \n? Memories \n ?Up to 1.5 Mbytes of Flash memory \n ?320 Kbytes of SRAM \n ?Flexible external static memory controller with up to 16-bit data bus: SRAM, PSRAM, NOR Flash memory \n ?Dual mode Quad-SPI interface \n? LCD parallel interface, 8080/6800 modes \n? Clock, reset and supply management \n ?1.7 to 3.6 V application supply and I/Os \n ?POR, PDR, PVD and BOR \n ?4-to-26 MHz crystal oscillator \n ?Internal 16 MHz factory-trimmed RC \n ?32 kHz oscillator for RTC with calibration \n ?Internal 32 kHz RC with calibration \n? Power consumption \n ?Run: 112 μA/MHz (peripheral off) \n ?Stop (Flash in Stop mode, fast wakeup time): 42 μA Typ.; 80 μA max @25 °C \n ?Stop (Flash in Deep power down mode, slow wakeup time): 15 μA Typ.; 46 μA max @25 °C \n ?Standby without RTC: 1.1 μA Typ.; 14.7 μA max at @85 °C \n ?VBAT supply for RTC: 1 μA @25 °C \n? 2x12-bit D/A converters \n? 1×12-bit, 2.4 MSPS ADC: up to 16 channels \n? 6x digital filters for sigma delta modulator, 12x PDM interfaces, with stereo microphone and sound source localization support \n? General-purpose DMA: 16-stream DMA? Up to 18 timers: up to twelve 16-bit timers, two 32-bit timers up to 100 MHz each with up to four IC/OC/PWM or pulse counter and quadrature (incremental) encoder input, two watchdog timers (independent and window), one SysTick timer, and a low-power timer \n? Debug mode \n ?Serial wire debug (SWD) & JTAG \n ?Cortex?-M4 Embedded Trace Macrocell? \n? Up to 114 I/O ports with interrupt capability \n ?Up to 109 fast I/Os up to 100 MHz \n ?Up to 114 five V-tolerant I/Os \n? Up to 24 communication interfaces \n ?Up to 4x I2C interfaces (SMBus/PMBus) \n ?Up to 10 UARTS: 4 USARTs / 6 UARTs (2 x 12.5 Mbit/s, 2 x 6.25 Mbit/s), ISO 7816 interface, LIN, IrDA, modem control) \n ?Up to 5 SPI/I2Ss (up to 50 Mbit/s, SPI or I2S audio protocol), out of which 2 muxed full-duplex I2S interfaces \n ?SDIO interface (SD/MMC/eMMC) \n ?Advanced connectivity: USB 2.0 full-speed device/host/OTG controller with PHY \n ?3x CAN (2.0B Active) \n ?1xSAI \n? True random number generator \n? CRC calculation unit \n? 96-bit unique ID \n? RTC: subsecond accuracy, hardware calendar \n? All packages are ECOPACK?2;

The STM32F413xG/H devices are based on the high-performance Arm? Cortex?-M4 32-bit RISC core operating at a frequency of up to 100 MHz. Their Cortex?-M4 core features a Floating point unit (FPU) single precision which supports all Arm single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.\n\n The STM32F413xG/H devices belong to the STM32F4 access product lines (with products combining power efficiency, performance and integration) while adding a new innovative feature called Batch Acquisition Mode (BAM) allowing to save even more power consumption during data batching.\n\n The STM32F413xG/H devices incorporate high-speed embedded memories (up to 1.5 Mbytes of Flash memory, 320 Kbytes of SRAM), and an extensive range of enhanced I/Os and peripherals connected to two APB buses, three AHB buses and a 32-bit multi-AHB bus matrix.\n\n All devices offer a 12-bit ADC, two 12-bit DACs, a low-power RTC, twelve general-purpose 16-bit timers including two PWM timer for motor control, two general-purpose 32-bit timers and a low power timer.\n\n They also feature standard and advanced communication interfaces.\n\n

STM32F413RH

ARM-Cortex-M4 32b MCUFPU, 125 DMIPS, up to 1.5MB Flash, 320KB RAM, USB OTG FS, 1 ADC, 2 DACs, 2 DFSDMs

STM32F413RH

Three-phase full shunt electricity meter evaluation board based on STPMS2, STISO621W and STM32F413RH

STM32F413RHT6

ARM-Cortex-M4 32b MCUFPU, 125 DMIPS, up to 1.5MB Flash, 320KB RAM, USB OTG FS, 1 ADC, 2 DACs, 2 DFSDMs

STM32F413VG

ARM-Cortex-M432bMCUFPU,125DMIPS,upto1.5MBFlash,320KBRAM,USBOTGFS,1ADC,2DACs,2DFSDMs

STM32F413VH

ARM-Cortex-M432bMCUFPU,125DMIPS,upto1.5MBFlash,320KBRAM,USBOTGFS,1ADC,2DACs,2DFSDMs

STM32F413XG

ARM-Cortex-M432bMCUFPU,125DMIPS,upto1.5MBFlash,320KBRAM,USBOTGFS,1ADC,2DACs,2DFSDMs

STM32F413xH

ARM-Cortex-M432bMCUFPU,125DMIPS,upto1.5MBFlash,320KBRAM,USBOTGFS,1ADC,2DACs,2DFSDMs

STM32F413ZG

ARM-Cortex-M432bMCUFPU,125DMIPS,upto1.5MBFlash,320KBRAM,USBOTGFS,1ADC,2DACs,2DFSDMs

STM32F413ZH

ARM-Cortex-M432bMCUFPU,125DMIPS,upto1.5MBFlash,320KBRAM,USBOTGFS,1ADC,2DACs,2DFSDMs