STM32F411

Discovery kit for STM32F411 line

STM32F411

STM32 development boards

STM32F411CE

帶DSP和FPU的高性能基本型系列ARM Cortex-M4 MCU，具有512 KB Flash、100 MHz CPU和ART加速器; ? Includes ST state-of-the-art patented technology \n? Dynamic efficiency line with BAM (Batch acquisition mode) \n ?1.7 V to 3.6 V power supply \n ?- 40°C to 85/105/125 °C temperature range \n? Core: Arm? 32-bit Cortex?-M4 CPU with FPU, adaptive real-time accelerator (ART Accelerator) allowing 0-wait state execution from flash memory, frequency up to 100 MHz, memory protection unit, 125 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions \n? Memories \n ?Up to 512 Kbytes of flash memory \n ?128 Kbytes of SRAM \n? Clock, reset, and supply management \n ?1.7 V to 3.6 V application supply and I/Os \n ?POR, PDR, PVD, and BOR \n ?4-to-26 MHz crystal oscillator \n ?Internal 16 MHz factory-trimmed RC \n ?32 kHz oscillator for RTC with calibration \n ?Internal 32 kHz RC with calibration \n? Power consumption \n ?Run: 100 μA/MHz (peripheral off) \n ?Stop (Flash in Stop mode, fast wakeup time): 42 μA typical at 25 °C; 65 μA max at 25 °C \n ?Stop (Flash in Deep power down mode, slow wakeup time): down to 9 μA at 25 °C; 28 μA max at 25 °C \n ?Standby: 1.8 μA at 25 °C / 1.7 V without RTC; 11 μA at 85 °C at 1.7 V \n ?VBAT supply for RTC: 1 μA at 25 °C \n? 1×12-bit, 2.4 MSPS A/D converter: up to 16 channels \n? General-purpose DMA: 16-stream DMA controllers with FIFOs and burst support? Up to 11 timers: up to six 16-bit, two 32-bit timers up to 100 MHz, each with up to four IC/OC/PWM or pulse counter and quadrature (incremental) encoder input, two watchdog timers (independent and window) and a SysTick timer \n? Debug mode \n ?Serial wire debug (SWD) & JTAG interfaces \n ?Cortexò-M4 Embedded Trace Macrocell? \n? Up to 81 I/O ports with interrupt capability \n ?Up to 78 fast I/Os up to 100 MHz \n ?Up to 77 5 V-tolerant I/Os \n? Up to 13 communication interfaces \n ?Up to 3 x I2C interfaces (SMBus/PMBus) \n ?Up to 3 USARTs (2 x 12.5 Mbit/s, 1 x 6.25 Mbit/s), ISO 7816 interface, LIN, IrDA, modem control) \n ?Up to 5 SPI/I2Ss (up to 50 Mbit/s, SPI, or I2S audio protocol), SPI2 and SPI3 with muxed full-duplex I2S to achieve audio class accuracy via internal audio PLL or external clock \n ?SDIO interface (SD/MMC/eMMC) \n ?Advanced connectivity: USB 2.0 full-speed device/host/OTG controller with on-chip PHY \n? CRC calculation unit \n? 96-bit unique ID \n? RTC: subsecond accuracy, hardware calendar \n? All packages are ECOPACK2 compliant;

The STM32F411xC/xE devices are based on the high-performance Arm? Cortex? -M4 32-bit RISC core operating at a frequency of up to 100 MHz. The Cortex?-M4 core features a floating-point unit (FPU) single precision, which supports all Arm single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU), which enhances application security. \n\n The STM32F411xC/xE belongs to the STM32 Dynamic Efficiency product line (with products combining power efficiency, performance and integration) while adding a new innovative feature called Batch Acquisition Mode (BAM) allowing to save even more power consumption during data batching.\n\n The STM32F411xC/xE incorporate high-speed embedded memories (up to 512 Kbytes of flash memory, 128 Kbytes of SRAM), and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB bus and a 32-bit multi-AHB bus matrix.\n\n All devices offer one 12-bit ADC, a low-power RTC, six general-purpose 16-bit timers including one PWM timer for motor control, two general-purpose 32-bit timers. They also feature standard and advanced communication interfaces. \n\n

STM32F411RC

帶DSP和FPU的高性能基本型系列ARM Cortex-M4 MCU，具有256 KB Flash、100 MHz CPU和ART加速器; ? Includes ST state-of-the-art patented technology \n? Dynamic efficiency line with BAM (Batch acquisition mode) \n ?1.7 V to 3.6 V power supply \n ?- 40°C to 85/105/125 °C temperature range \n? Core: Arm? 32-bit Cortex?-M4 CPU with FPU, adaptive real-time accelerator (ART Accelerator) allowing 0-wait state execution from flash memory, frequency up to 100 MHz, memory protection unit, 125 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions \n? Memories \n ?Up to 512 Kbytes of flash memory \n ?128 Kbytes of SRAM \n? Clock, reset, and supply management \n ?1.7 V to 3.6 V application supply and I/Os \n ?POR, PDR, PVD, and BOR \n ?4-to-26 MHz crystal oscillator \n ?Internal 16 MHz factory-trimmed RC \n ?32 kHz oscillator for RTC with calibration \n ?Internal 32 kHz RC with calibration \n? Power consumption \n ?Run: 100 μA/MHz (peripheral off) \n ?Stop (Flash in Stop mode, fast wakeup time): 42 μA typical at 25 °C; 65 μA max at 25 °C \n ?Stop (Flash in Deep power down mode, slow wakeup time): down to 9 μA at 25 °C; 28 μA max at 25 °C \n ?Standby: 1.8 μA at 25 °C / 1.7 V without RTC; 11 μA at 85 °C at 1.7 V \n ?VBAT supply for RTC: 1 μA at 25 °C \n? 1×12-bit, 2.4 MSPS A/D converter: up to 16 channels \n? General-purpose DMA: 16-stream DMA controllers with FIFOs and burst support? Up to 11 timers: up to six 16-bit, two 32-bit timers up to 100 MHz, each with up to four IC/OC/PWM or pulse counter and quadrature (incremental) encoder input, two watchdog timers (independent and window) and a SysTick timer \n? Debug mode \n ?Serial wire debug (SWD) & JTAG interfaces \n ?Cortexò-M4 Embedded Trace Macrocell? \n? Up to 81 I/O ports with interrupt capability \n ?Up to 78 fast I/Os up to 100 MHz \n ?Up to 77 5 V-tolerant I/Os \n? Up to 13 communication interfaces \n ?Up to 3 x I2C interfaces (SMBus/PMBus) \n ?Up to 3 USARTs (2 x 12.5 Mbit/s, 1 x 6.25 Mbit/s), ISO 7816 interface, LIN, IrDA, modem control) \n ?Up to 5 SPI/I2Ss (up to 50 Mbit/s, SPI, or I2S audio protocol), SPI2 and SPI3 with muxed full-duplex I2S to achieve audio class accuracy via internal audio PLL or external clock \n ?SDIO interface (SD/MMC/eMMC) \n ?Advanced connectivity: USB 2.0 full-speed device/host/OTG controller with on-chip PHY \n? CRC calculation unit \n? 96-bit unique ID \n? RTC: subsecond accuracy, hardware calendar \n? All packages are ECOPACK2 compliant;

The STM32F411xC/xE devices are based on the high-performance Arm? Cortex? -M4 32-bit RISC core operating at a frequency of up to 100 MHz. The Cortex?-M4 core features a floating-point unit (FPU) single precision, which supports all Arm single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU), which enhances application security. \n\n The STM32F411xC/xE belongs to the STM32 Dynamic Efficiency product line (with products combining power efficiency, performance and integration) while adding a new innovative feature called Batch Acquisition Mode (BAM) allowing to save even more power consumption during data batching.\n\n The STM32F411xC/xE incorporate high-speed embedded memories (up to 512 Kbytes of flash memory, 128 Kbytes of SRAM), and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB bus and a 32-bit multi-AHB bus matrix.\n\n All devices offer one 12-bit ADC, a low-power RTC, six general-purpose 16-bit timers including one PWM timer for motor control, two general-purpose 32-bit timers. They also feature standard and advanced communication interfaces. \n\n

STM32F411RE

帶DSP和FPU的高性能基本型系列ARM Cortex-M4 MCU，具有512 KB Flash、100 MHz CPU和ART加速器; ? Includes ST state-of-the-art patented technology \n? Dynamic efficiency line with BAM (Batch acquisition mode) \n ?1.7 V to 3.6 V power supply \n ?- 40°C to 85/105/125 °C temperature range \n? Core: Arm? 32-bit Cortex?-M4 CPU with FPU, adaptive real-time accelerator (ART Accelerator) allowing 0-wait state execution from flash memory, frequency up to 100 MHz, memory protection unit, 125 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions \n? Memories \n ?Up to 512 Kbytes of flash memory \n ?128 Kbytes of SRAM \n? Clock, reset, and supply management \n ?1.7 V to 3.6 V application supply and I/Os \n ?POR, PDR, PVD, and BOR \n ?4-to-26 MHz crystal oscillator \n ?Internal 16 MHz factory-trimmed RC \n ?32 kHz oscillator for RTC with calibration \n ?Internal 32 kHz RC with calibration \n? Power consumption \n ?Run: 100 μA/MHz (peripheral off) \n ?Stop (Flash in Stop mode, fast wakeup time): 42 μA typical at 25 °C; 65 μA max at 25 °C \n ?Stop (Flash in Deep power down mode, slow wakeup time): down to 9 μA at 25 °C; 28 μA max at 25 °C \n ?Standby: 1.8 μA at 25 °C / 1.7 V without RTC; 11 μA at 85 °C at 1.7 V \n ?VBAT supply for RTC: 1 μA at 25 °C \n? 1×12-bit, 2.4 MSPS A/D converter: up to 16 channels \n? General-purpose DMA: 16-stream DMA controllers with FIFOs and burst support? Up to 11 timers: up to six 16-bit, two 32-bit timers up to 100 MHz, each with up to four IC/OC/PWM or pulse counter and quadrature (incremental) encoder input, two watchdog timers (independent and window) and a SysTick timer \n? Debug mode \n ?Serial wire debug (SWD) & JTAG interfaces \n ?Cortexò-M4 Embedded Trace Macrocell? \n? Up to 81 I/O ports with interrupt capability \n ?Up to 78 fast I/Os up to 100 MHz \n ?Up to 77 5 V-tolerant I/Os \n? Up to 13 communication interfaces \n ?Up to 3 x I2C interfaces (SMBus/PMBus) \n ?Up to 3 USARTs (2 x 12.5 Mbit/s, 1 x 6.25 Mbit/s), ISO 7816 interface, LIN, IrDA, modem control) \n ?Up to 5 SPI/I2Ss (up to 50 Mbit/s, SPI, or I2S audio protocol), SPI2 and SPI3 with muxed full-duplex I2S to achieve audio class accuracy via internal audio PLL or external clock \n ?SDIO interface (SD/MMC/eMMC) \n ?Advanced connectivity: USB 2.0 full-speed device/host/OTG controller with on-chip PHY \n? CRC calculation unit \n? 96-bit unique ID \n? RTC: subsecond accuracy, hardware calendar \n? All packages are ECOPACK2 compliant;

The STM32F411xC/xE devices are based on the high-performance Arm? Cortex? -M4 32-bit RISC core operating at a frequency of up to 100 MHz. The Cortex?-M4 core features a floating-point unit (FPU) single precision, which supports all Arm single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU), which enhances application security. \n\n The STM32F411xC/xE belongs to the STM32 Dynamic Efficiency product line (with products combining power efficiency, performance and integration) while adding a new innovative feature called Batch Acquisition Mode (BAM) allowing to save even more power consumption during data batching.\n\n The STM32F411xC/xE incorporate high-speed embedded memories (up to 512 Kbytes of flash memory, 128 Kbytes of SRAM), and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB bus and a 32-bit multi-AHB bus matrix.\n\n All devices offer one 12-bit ADC, a low-power RTC, six general-purpose 16-bit timers including one PWM timer for motor control, two general-purpose 32-bit timers. They also feature standard and advanced communication interfaces. \n\n

STM32F411RET6

STM32 Nucleo-64 boards

Description TheSTM32NucleoboardprovidesanaffordableandflexiblewayforuserstotryoutnewconceptsandbuildprototypeswiththeSTM32microcontroller,choosingfromthevariouscombinationsofperformance,powerconsumptionandfeatures.TheArduino?UnoV3connectivitysupportandthe

STM32F411RET6

STM32 Nucleo-64 boards

Features ?STM32microcontrollerwithLQFP64package ?Twotypesofextensionresources –ArduinoUnoRevision3connectivity –STMicroelectronicsMorphoextensionpin headersforfullaccesstoallSTM32I/Os ?mbed-enabled(http://mbed.org) ?On-boardST-LINK/V2-1 debugger/programmerwit

STM32F411RET6

STM32 Nucleo-64 boards

Features Commonfeatures ?STM32microcontrollerinanLQFP64orLQFP48package ?1userLEDsharedwithARDUINO? ?1userand1resetpush-buttons ?32.768kHzcrystaloscillator ?Boardconnectors: –ARDUINO?UnoV3expansionconnector –STmorphoextensionpinheadersforfullaccessto

STM32F411RET6U

STM32 Nucleo-64 boards

Features ?Commonfeatures –STM32microcontrollerinLQFP64package –1userLEDsharedwithARDUINO? –1userand1resetpush-buttons –32.768kHzcrystaloscillator –Boardconnectors: ?ARDUINO?UnoV3expansionconnector ?STmorphoextensionpinheadersforfullaccesstoallSTM32

STM32F411CC

ARM? Cortex?-M4 32b MCUFPU, 125 DMIPS, 512KB Flash, 128KB RAM, USB OTG FS, 11 TIMs, 1 ADC, 13 comm. interfaces