STM32F303VB數(shù)據(jù)手冊(cè)ST中文資料規(guī)格書

描述 Description

The STM32F303xB/STM32F303xC family is based on the high-performance Arm? Cortex?-M4 32-bit RISC core with FPU operating at a frequency of up to 72 MHz, and embedding a floating point unit (FPU), a memory protection unit (MPU) and an embedded trace macrocell (ETM). The family incorporates high-speed embedded memories (up to 256 Kbytes of Flash memory, up to 40 Kbytes of SRAM) and an extensive range of enhanced I/Os and peripherals connected to two APB buses.

The devices offer up to four fast 12-bit ADCs (5 Msps), seven comparators, four operational amplifiers, up to two DAC channels, a low-power RTC, up to five general-purpose 16-bit timers, one general-purpose 32-bit timer, and two timers dedicated to motor control. They also feature standard and advanced communication interfaces: up to two I2Cs, up to three SPIs (two SPIs are with multiplexed full-duplex I2Ss), three USARTs, up to two UARTs, CAN and USB. To achieve audio class accuracy, the I2S peripherals can be clocked via an external PLL.

The STM32F303xB/STM32F303xC family operates in the -40 to +85 °C and -40 to +105 °C temperature ranges from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.

The STM32F303xB/STM32F303xC family offers devices in four packages ranging from 48 pins to 100 pins.

The set of included peripherals changes with the device chosen.

特性 Features

? Core: Arm? Cortex?-M4 32-bit CPU with FPU (72 MHz max), single-cycle multiplication and HW division, 90 DMIPS (from CCM), DSP instruction and MPU (memory protection unit)
? Operating conditions:
?VDD, VDDA voltage range: 2.0 V to 3.6 V
? Memories
?128 to 256 Kbytes of Flash memory
?Up to 40 Kbytes of SRAM, with HW parity check implemented on the first 16 Kbytes.
?Routine booster: 8 Kbytes of SRAM on instruction and data bus, with HW parity check (CCM)
? CRC calculation unit
? Reset and supply management
?Power-on/power-down reset (POR/PDR)
?Programmable voltage detector (PVD)
?Low-power modes: Sleep, Stop and Standby
?VBAT supply for RTC and backup registers
? Clock management
?4 to 32 MHz crystal oscillator
?32 kHz oscillator for RTC with calibration
?Internal 8 MHz RC with x 16 PLL option
?Internal 40 kHz oscillator
? Up to 87 fast I/Os
?All mappable on external interrupt vectors
?Several 5 V-tolerant
? Interconnect matrix
? 12-channel DMA controller
? Four ADCs 0.20 μS (up to 39 channels) with selectable resolution of 12/10/8/6 bits, 0 to 3.6 V conversion range, single ended/differential input, separate analog supply from 2 to 3.6 V
? Two 12-bit DAC channels with analog supply from 2.4 to 3.6 V
? Seven fast rail-to-rail analog comparators with analog supply from 2 to 3.6 V
? Four operational amplifiers that can be used in PGA mode, all terminals accessible with analog supply from 2.4 to 3.6 V
? Up to 24 capacitive sensing channels supporting touchkey, linear and rotary touch sensors
? Up to 13 timers
?One 32-bit timer and two 16-bit timers with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
?Two 16-bit 6-channel advanced-control timers, with up to 6 PWM channels, deadtime generation and emergency stop
?One 16-bit timer with 2 IC/OCs, 1 OCN/PWM, deadtime generation and emergency stop
?Two 16-bit timers with IC/OC/OCN/PWM, deadtime generation and emergency stop
?Two watchdog timers (independent, window)
?SysTick timer: 24-bit downcounter
?Two 16-bit basic timers to drive the DAC
? Calendar RTC with Alarm, periodic wakeup from Stop/Standby
? Communication interfaces
?CAN interface (2.0B Active)
?Two I2C Fast mode plus (1 Mbit/s) with 20 mA current sink, SMBus/PMBus, wakeup from STOP
?Up to five USART/UARTs (ISO 7816 interface, LIN, IrDA, modem control)
?Up to three SPIs, two with multiplexed half/full duplex I2S interface, 4 to 16 programmable bit frames
?USB 2.0 full speed interface
?Infrared transmitter
? Serial wire debug, Cortex?-M4 with FPU ETM, JTAG
? 96-bit unique ID