ST7626中文資料矽創電子數據手冊PDF規格書

INTRODUCTION

The ST7626 is a driver & controller LSI for 65K color graphic dot-matrix liquid crystal display systems. It generates 294 Segment and 68 Common driver circuits. This chip is connected directly to a microprocessor, accepts Serial Peripheral Interface (SPI) or 8-bit/16-bit parallel display data and stores in an on-chip display data RAM. It performs display data RAM read/write operation with no external operating clock to minimize power consumption. In addition, because it contains power supply circuits necessary to drive liquid crystal, it is possible to make a display system with the fewest components.

FEATURES

Driver Output Circuits

? 294 Segment Outputs / 68 Common Outputs

Applicable Duty Ratios

? Various Partial Display

? Partial Window Moving & Data Scrolling

Gray-Scale Display

? 4FRC & 31 PWM function circuit to display

? 64 gray-scale display.

On-chip Display Data RAM

? Capacity: 98 x 68 x 16 =106,624 bits

? 4K colors (RGB)=(444) mode

? 65K colors (RGB)=(565) mode

? Truncated 262K colors (RGB)=(666) mode

? Truncated 16M colors (RGB)=(888) mode

Microprocessor Interface

? 8/16-bit parallel bi-directional interface with 6800-series or 8080-series

? 4-line serial interface (4-line-SIF)

? 3-line serial interface (3-line-SIF)

On-chip Low Power Analog Circuit

? On-chip Oscillator Circuit

? On-chip Voltage Converter (x2, x3, x4, x5) with internal booster capacitors.

? Extremely Few Outsider Compoment. (Minimum required outsider compoments: One Capacitor).

? On-chip Voltage Regulator (Temperature gradient = -0.065/°C)

? On-chip Electronic Contrast Control Function (406 steps)

? Voltage Follower (LCD bias: 1/5 to 1/12)

Operating Voltage Range

? Supply Digital Voltage (VDD, VDD1): 1.8 to 3.3V

? Supply Analog Voltage (VDD2, VDD3, VDD4, VDD5): 2.4 to 3.3V

? LCD Driving Voltage (VOP = V0 - VSS): 3.76V to 18V

? The suggested value of V0 is under 11 V with bias =1/9.

LCD Driving Voltage (EEPROM)

? Contrast Adjustment Value is stored in the Built-In EEPROM for better display quility.

LCM Performance Adjustment (EEPROM)

? Adjustment Value for best Display Performance is stored in the Built-In EEPROM.

Package Type

? Application for COG