Description

The ST485E is a low power transceiver for RS-485 and RS-422 communication. Each driver output and receiver input is protected against ±15 kV electrostatic discharge (H.B.M.) (ESD) shocks, without latch-up. These parts contain one driver and one receiver in half duplex configuration.

Features

■ Low quiescent current: 300 μA

■ Designed for RS-485 interface application

■ -7 V to 12 V common mode input voltage range

■ Driver maintains high impedance in 3-state or with the power OFF

■ 70 mV typical input hysteresis

■ 30 ns propagation delay, 5 ns skew

■ Operates from a single 5 V supply

■ Current limiting and thermal shutdown for driver overload protection

■ ESD protection:

– ±15 kV (H.B.M.)

– ±8 kV (IEC-1000-4-2 contact discharge)

■ Allows up to 256 transceivers on the bus

ST485EBD屬于集成電路（IC） > 驅動器，接收器，收發器。意法半導體（ST）集團制造生產的ST485EBD驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。