Features

? SPD5 Hub Device

? Two-wire programmable I2C or I3C Basic bus serial

interface

? Single device load on the Host bus

? Up to 12.5MHz transfer rate

? 1.8V power supply input

? 1.0V LDO output at VIO pin; Optionally can take

1.0V input power supply on VIO pin

? Supports 1.0V, 1.1V, 1.2V, and 1.8V Push-Pull IO

levels

? Supports 1.0V, 1.1V, 1.2V, 1.8V, 2.5V, and 3.3V

Open-drain IO levels

? 16 blocks of non-volatile memory; 64 bytes per

block

? Hub Function (a.k.a. Transparent Mode of

operation) with 3 address bit translation

? Integrated Temperature Sensor; 0.5°C Accuracy

with 0.25°C resolution

? Packet Error Check (PEC) Function

? Parity Error Check Function

? Bus Reset Function

? Up to 8 unique addressing

? Programmable I2C, I3C Basic Bus Addressing

Scheme

? In Band Interrupt (IBI) (Transparent Mode of

Operation)

? Write protection for each block of NVM

? 9-pin thermally enhanced DFN package

? Temperature: Industrial range of -40°C to 125°C