Description

The SLR Series has no isolation between the control switch

input and the solid-state output. Select the SLR for applications

where the control switch is the same voltage source as the

load. Provides the noiseless, reliability and long life of a

solid-state relay, without the cost of isolation circuitry. The

SLR Series offers random switching and is normally used for

inductive loads. When fully insulated female terminals are used

on the connection wires, the system meets the requirements

for touch-proof connections.

Operation

The solid-state output is located between terminals 1 and 2

and can be ordered as either normally open or normally closed,

when voltage is applied and S1 is open. When S1 is closed, the

solid-state output between terminals 1 and 2 closes (or opens).

If S1 is opened, the solid-state output will open (or close).

Reset: Opening S1 resets the output to its original state. Reset

is also accomplished by removing input voltage.

SLR1420A屬于繼電器 > 固態繼電器。力特公司制造生產的SLR1420A固態繼電器固態繼電器 (SSR) 是光隔離的電子開關器件，當在控制輸入端子兩端施加小電壓時，這些器件會打開或關閉。SSR 與設計用于開關高達 660 V 的 AC 或 DC 負載的底座、DIN 導軌、插座和板安裝式機電繼電器相似，但基于半導體且沒有活動部件。這些器件可根據負載電壓、額定電流和開關電路配置（例如 SPST、SPDT、DPST 和 3PST）進行選擇。