SLG59M1639V集成電路（IC）的配電開關負載驅動器規格書PDF中文資料

General Description

The SLG59M1639V is a dual-channel, 45 mΩ pFET load

switch designed to switch 1.5 to 5.5 V power rails up to 2 A in

each channel. When either channel is enabled,

reverse-current protection will quickly open the switch in the

event of a reverse-voltage condition is detected

(a VOUT > VIN + 50 mV condition opens the switch). In the

event that the channel’s VIN voltage is too low, the load switch

also contains an internal VIN(UVLO) threshold monitor to keep

or to turn the switch OFF. Each load switch is independently

controlled via its own low-voltage compatible CMOS input.

Designed to operate over a -40°C to 85°C range, the

SLG59M1639V is available in a RoHS-compliant, ultra-small

1.6 x 1.0 mm STDFN package.

Features

? Integrated 2-Channel pFET Load Switch

? 2 A Maximum Continuous Switch Current per Channel

? Low Typical RDSON:

? 45 mΩ at VIN = 5 V

? 60 mΩ at VIN = 2.5 V

? 80 mΩ at VIN = 1.5 V

? Operating Voltage: 1.5 V to 5.5 V

? Reverse-current/voltage Protection

? Low-voltage CMOS Logic Compatible Switch Control

? Operating temperature range: -40°C to 85°C

? Pb-Free / Halogen-Free / RoHS compliant packaging