SDA5255中文資料西門子數據手冊PDF規格書

General Description

The SDA 525x contains a slicer for TTX, VPS and WSS, an accelerating acquisition hardware modul, a display generator for “Level 1” TTX data and an 8 bit microcontroller running at 333 ns cycle time. The controller with dedicated hardware guarantees flexibility, does most of the internal processing of TTX acquisition, transfers data to/from the external memory interface and receives/transmits data via I2C and UART user interfaces. The block diagram shows the internal organization of the SDA 525x. The Slicer combined with dedicated hardware stores TTX data in a VBI buffer of 1 Kbyte. The microcontroller firmware does the total acquisition task (hamming- and parity-checks, page search and evaluation of header control bits) once per field.

Features

Acquisition

? Feature selection via special function register

? Simultaneous reception of TTX, VPS and WSS

? Fixed framing code for VPS and TTX

? Acquisition during VBI

? Direct access to VBI RAM buffer

? Acquisition of packets X/26, X/27, 8/30 (firmware)

? Assistance of all relevant checks (firmware)

? 1-bit framing code error tolerance (switchable)

Display

? Features selectable via special function register

? 50/60 Hz display

? Level 1 serial attribute display pages

? Blanking and contrast reduction output

? 8 direct addressable display pages for SDA 5250, SDA 5254 and SDA 5255

? 1 direct addressable display page for SDA 5251 and SDA 5252

? 12 × 10 character matrix

? 96 character ROM (standard G0 character set)

? 143 national option characters for 11 languages

? 288 characters for X/26 display

? 64 block mosaic graphic characters

? 32 characters for OSD in expanded character ROM + 32 characters inside OSD box

? Conceal/reveal

? Transparent foreground/background - inside/outside of a box

? Contrast reduction inside/outside of a box

? Cursor (colour changes from foreground to background colour)

? Flash (flash rate 1s)

? Programmable horizontal and vertical sync delay

? Full screen background colour in outer screen

? Double size / double width / double height characters

Synchronization

? Display synchronization to sandcastle or Horizontal Sync (HS) and Vertical Sync (VS) with start-stop-oscillator

? Independent clock systems for acquisition, display and controller

Microcontroller

? 8 bit C500-CPU (8051 compatible)

? 18 MHz internal clock

? 0.33 μs instruction cycle

? Parallel 8-bit data and 16...19 - bit address bus (ROMless-Version)

? Eight 16-bit data pointer registers (DPTR)

? Two 16-bit timers

? Watchdog timer

? Capture compare timer for infrared remote control decoding

? Serial interface (UART)

? 256 bytes on-chip RAM

? 8 Kbyte on-chip display-RAM (access via MOVX) for SDA 5250, SDA 5254 and SDA 5255

? 1 Kbyte on-chip display-RAM (access via MOVX) for SDA 5251 and SDA 5252

? 1 Kbyte on-chip TVT/VPS-Acquisition-buffer-RAM (access via MOVX)

? 1 Kbyte on-chip extended-RAM (access via MOVX) for SDA 5250, SDA 5254 and SDA 5255

? 6 channel 8-bit pulse width modulation unit

? 2 channel 14-bit pulse width modulation unit

? 4 multiplexed ADC inputs with 8-bit resolution

? One 8-bit I/O port with open drain output and optional I2C-Bus emulation (PORT 0)

? Two 8-bit multifunctional I/O ports (PORT 1, PORT 3)

? One 4-bit port working as digital or analog inputs (PORT 2)

? One 2-bit I/O port with optional functions

? One 3-bit I/O port with optional RAM/ROM address expansion up to 512 Kbyte (ROMless-Version)

– P-SDIP-52-1 Package or P-MQFP-64-1 for ROM-Versions (SDA 5251, SDA 5252, SDA 5254, SDA 5255)

– P-MQFP-80-1 Package for ROMless-Version (SDA 5250 M)

– P-LCC-84-2 Package for Emulator-Version (SDA 5250)

– 5 V Supply Voltage