SC26C94中文資料飛利浦?jǐn)?shù)據(jù)手冊(cè)PDF規(guī)格書

DESCRIPTION

The 26C94 quad universal asynchronous receiver/transmitter (QUART) combines four enhanced Philips Semiconductors industry-standard UARTs with an innovative interrupt scheme that can vastly minimize host processor overhead. It is implemented using Philips Semiconductors’ high-speed CMOS process that combines small die size and cost with low power consumption.

FEATURES

? New low overhead interrupt control

? Four Philips Semiconductors industry-standard UARTs

? Eight byte receive FIFO and eight byte transmit FIFO for each UART

? Programmable data format:

– 5 to 8 data bits plus parity

– Odd, even, no parity or force parity

– 1, 1.5 or 2 stop bits programmable in 1/16-bit increments

? Baud rate for the receiver and transmitter selectable from:

– 23 fixed rates: 50 to 230.4K baud Non-standard rates to 1.0M baud

– User-defined rates from the programmable counter/timer associated with each of two blocks

– External 1x or 16x clock

? Parity, framing, and overrun error detection

? False start bit detection

? Line break detection and generation

? Programmable channel mode

– Normal (full-duplex), automatic echo, local loop back, remote loopback

? Programmable interrupt priorities

? Identification of highest priority interrupt

? Global interrupt register set provides data from interrupting channel

? Vectored interrupts with programmable vector format

? IACKN and DTACKN signals

? Built-in baud rate generator with choice of 18 rates

? Four I/O pins per UART for modem controls, clocks, etc.

? Power down mode

? High-speed CMOS technology

? 52-pin PLCC and 48-pin DIP

? Commercial and industrial temperature ranges available

? On-chip crystal oscillator

? TTL compatible

? Single +5V power supply with low power mode

? Two multifunction programmable 16-bit counter/timers

? 1MHz 16x mode operation

? 30ns data bus release time

? “Watch Dog” timer for each receiver