SC16IS741AIPW

Single UART with I2C-bus/SPI interface, 64 bytes of transmit and receive FIFOs, IrDA SIR built-in support; General featuresSingle full-duplex UART\nSelectable I2C-bus or SPI interface\n3.3 V or 2.5 V operation\nIndustrial temperature range: -40 °C to +95 °C\n64 bytes FIFO (transmitter and receiver)\nFully compatible with industrial standard 16C450 and equivalent\nBaud rates up to 5 Mbit/s in 16x clock mode\nAuto hardware flow control using RTS/CTS\nAuto software flow control with programmable Xon/Xoff characters\nSingle or double Xon/Xoff characters\nAutomatic RS-485 support (automatic slave address detection)\nRS-485 driver direction control via RTS signal\nRS-485 driver direction control inversion\nBuilt-in IrDA encoder and decoder interface\nSoftware reset\nTransmitter and receiver can be enabled/disabled independent of each other\nReceive and Transmit FIFO levels\nProgrammable special character detection\nFully programmable character formatting:5-bit, 6-bit, 7-bit or 8-bit character\nEven, odd, or no parity\n1, 1?, or 2 stop bits\nLine break generation and detection\nInternal Loopback mode\nSleep current less than 30 μA at 3.3 V\nIndustrial and commercial temperature ranges\nAvailable in the TSSOP16 package\nI2C-bus featuresNoise filter on SCL/SDA inputs\n400 kbit/s maximum speed\nCompliant with I2C-bus fast speed\nSlave mode only\nSPI featuresSlave mode only\nSPI Mode 0\n;

The SC16IS741A is a slave I2C-bus/SPI interface to a single-channel high performanceUART. It offers data rates up to 5 Mbit/s and guarantees low operating and sleepingcurrent. The device comes in the TSSOP16 package, which makes it ideally suitable forhandheld, battery operated applications. This device enables seamless protocolconversion from I2C-bus or SPI to and RS-232/RS-485 and are fully bidirectional.\nThe SC16IS741A’s internal register set is backward-compatible with the widely used andwidely popular 16C450. This allows the software to be easily written or ported fromanother platform.\nThe SC16IS741A also provides additional advanced features such as auto hardware andsoftware flow control, automatic RS-485 support, and software reset. This allows thesoftware to reset the UART at any moment, independent of the hardware reset signal.\n

恩XP

SC16IS741AIPW

絲?。?a target="_blank" title="Marking" href="/is741a/marking.html">IS741A；Package：TSSOP16；Single UART with I2C-bus/SPI interface, 64 bytes of transmit and receive FIFOs, IrDA SIR built-in support

Generaldescription TheSC16IS741A1isaslaveI2C-bus/SPIinterfacetoasingle-channelhighperformance UART.Itoffersdataratesupto5Mbit/sandguaranteeslowoperatingandsleeping current.ThedevicecomesintheTSSOP16package,whichmakesitideallysuitablefor handheld,battery

ETC

SC16IS741AIPWJ

Single UART with I2C-bus/SPI interface, 64 bytes of transmit and receive FIFOs, IrDA SIR built-in support

Generaldescription TheSC16IS741A1isaslaveI2C-bus/SPIinterfacetoasingle-channelhighperformance UART.Itoffersdataratesupto5Mbit/sandguaranteeslowoperatingandsleeping current.ThedevicecomesintheTSSOP16package,whichmakesitideallysuitablefor handheld,battery

ETC

SC172MLTRT

Semtech(升特)
MLPD-10

Semtech(升特)

SC173MLTRT

Semtech(升特)
MLPD-10

Semtech(升特)