SC16C554B

5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 16-byte FIFOs

PHI

SC16C554BIB80

5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 16-byte FIFOs; 4 channel UART\n5 V, 3.3 V and 2.5 V operation\nIndustrial temperature range (-40 ℃ to +85 ℃)\nThe SC16C554B is pin and software compatible with the industry-standard ST16C454/554, ST68C454/554, ST16C554, TL16C554\nThe SC16C554DB is pin and software compatible with ST16C554D, and software compatible with ST16C454/554, ST16C554, TL16C554\nUp to 5 Mbit/s data rate at 5 V and 3.3 V, and 3 Mbit/s at 2.5 V\n5 V tolerant on input only pins\n16-byte transmit FIFO\n16-byte receive FIFO with error flags\nProgrammable auto-RTS and auto-CTS In auto-CTS mode, CTS controls transmitter\nIn auto-RTS mode, RX FIFO contents and threshold control RTS\nAutomatic hardware flow control (RTS/CTS)\nSoftware selectable baud rate generator\nFour selectable Receive FIFO interrupt trigger levels\nStandard modem interface\nStandard asynchronous error and framing bits (Start, Stop, and Parity Overrun Break)\nTransmit, Receive, Line Status, and Data Set interrupts independently controlled\nFully programmable character formatting: 5-bit, 6-bit, 7-bit, or 8-bit characters\nEven, odd, or no-parity formats\n1, 112, or 2-stop bit\nBaud generation (DC to 5 Mbit/s)\nFalse start-bit detection\nComplete status reporting capabilities\n3-state output TTL drive capabilities for bidirectional data bus and control bus\nLine break generation and detection\nInternal diagnostic capabilities: Loopback controls for communications link fault isolation\nPrioritized interrupt system controls\nModem control functions (CTS, RTS, DSR, DTR, RI, CD).\n;

The SC16C554B/554DB is a 4-channel Universal Asynchronous Receiver and Transmitter (QUART) used for serial data communications. Its principal function is to convert parallel data into serial data and vice versa. The UART can handle serial data rates up to 5 Mbit/s. It comes with an Intel (16 mode) or Motorola (68 mode) interface.\nThe SC16C554B/554DB is pin compatible with the ST16C554 and TL16C554 and it will power-up to be functionally equivalent to the 16C454. Programming of control registers enables the added features of the SC16C554B/554DB. Some of these added features are the 16-byte receive and transmit FIFOs, four receive trigger levels. The SC16C554B/554DB also provides DMA mode data transfers through FIFO trigger levels and the TXRDY and RXRDY signals. (TXRDY and RXRDY signals are not available in the HVQFN48 package.) On-board status registers provide the user with error indications, operational status, and modem interface control. System interrupts may be tailored to meet user requirements. An internal loopback capability allows on-board diagnostics.\nThe SC16C554B/554DB operates at 5 V, 3.3 V and 2.5 V, and the industrial temperature range, and is available in plastic PLCC68, LQFP64, LQFP80, and HVQFN48 packages. On the HVQFN48 package only, channel C has all the modem pins. Channels A and B have only RTSn and CTSn pins and channel D does not have any modem pin.\n

恩XP

SC16C554BIBM

5 V、3.3 V和2.5 V的四通道UART，5 Mbit/s（最快），帶有16字節FIFO; 4通道UART\n5 V、3.3 V和2.5 V操作\n工業溫度范圍（-40 ℃至+85 ℃）\nSC16C554B的引腳和軟件兼容行業標準ST16C454/554、ST68C454/554、ST16C554、TL16C554\nSC16C554DB的引腳和軟件兼容ST16C554D，且軟件兼容ST16C454/554、ST16C554、TL16C554\n數據速率在5 V和3.3 V時最快為5 Mbit/s，而在2.5 V時最快為3 Mbit/s\n僅輸入引腳的容限為5 V\n16字節發送FIFO\n帶有錯誤標志的16字節接收FIFO\n可編程自動RTS和自動CTS 在自動CTS模式中，CTS控制發送器\n在自動RTS模式中，RX FIFO內容和閾值控制RTS\n\n自動硬件流控制(RTS/CTS)\n軟件可選波特率生成器\n四個可選的接收FIFO中斷觸發電平\n標準調制解調器接口\n標準異步誤差和幀劃分位（開始、停止和奇偶校驗超限中斷）\n獨立控制發送、接收、線路狀態和數據集中斷\n完全可編程的字符格式： 5位、6位、7位或8位字符\n偶、奇或無奇偶校驗格式\n1、112或2停止位\n波特生成（DC至5 Mbit/s）\n\n錯誤起始位檢測\n完備的狀態報告能力\n雙向數據總線和控制總線的三態輸出TTL驅動能力\n線中止的產生和檢測 \n內部診斷能力： 用于隔離通信鏈路故障的環回控制\n\n有優先順序的中斷系統控制\n調制解調器控制功能(CTS、RTS、DSR、DTR、RI、CD)。\n;

SC16C554B/554DB是一款4通道通用異步接收器和發送器(QUART)，用于串行數據通信。其主要功能是將并行數據轉換成串行數據或?qū)⒋袛?shù)據轉換成并行數據。UART可處理最高5 Mbit/s的串行數據速率。附帶Intel（16模式）或Motorola（68模式）接口。\nSC16C554B/554DB的引腳兼容ST16C554和TL16C554，其功能等同于16C454。對控制寄存器進行編程可啟用SC16C554B/554DB的附加功能。其中一些附加功能為16字節接收和發送FIFO、四個接收觸發電平。SC16C554B/554DB還提供通過FIFO觸發電平以及TXRDY和RXRDY信號進行的DMA模式數據傳輸。（HVQFN48封裝不提供TXRDY和RXRDY信號。）板載狀態寄存器為用戶提供錯誤指示、操作狀態和調制解調器接口控制?？啥ㄖ葡到y(tǒng)中斷以滿足用戶需求。內部環回能力允許進行板載診斷。\nSC16C554B/554DB工作在5 V、3.3 V和2.5 V以及工業溫度范圍下，且提供塑料PLCC68、LQFP64、LQFP80和HVQFN48封裝。僅在HVQFN48封裝中，通道C才具有所有調制解調器引腳。通道A和B僅有RTSn和CTSn引腳而通道D沒有任何調制解調器引腳。\n

恩XP

SC16C554B_10

5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 16-byte FIFOs

ETC

SC16C554BIB64

5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 16-byte FIFOs

PHI

SC16C554BIB64

5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 16-byte FIFOs

ETC

SC16C554BIB64

5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 16-byte FIFOs

ETC

SC16C554BIB64,151

總線轉UART;

ETC

SC16C554BIB80

5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 16-byte FIFOs

PHI

SC16C554BIB80

5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 16-byte FIFOs

ETC