[NEL Frequency Controls]

Description

The HA-A1370 Seriesof quartz crystal oscillators provide enable/disable 3-state CMOS compatible signals for bus connected systems. Supplying Pin 1 of the HA-A1370units with a logic “0 enables the output on Pin 5. Alternately, supplying pin 1 of the HA-A1380units with a logic “1 enables its Pin 5 output. In the disabled mode, Pin 5 presents a high impedance to the load. All units are resistance welded in an all metal package, offering RFI shielding, and are designed to survive standard wave soldering operations without damage. Insulated standoffs to enhance board cleaning are standard.

Features

? Wide frequency range– 0.5MHz to 20.0MHz

? User specified tolerance available

? Will withstand vapor phase temperatures of 253°C for 4 minutes maximum

? Space-saving alternative to discrete component oscillators

? High shock resistance, to 3000g

? All metal, resistance weld, hermetically sealed package

? 3.3 Volt operation

? Low Jitter

? High Q Crystal actively tuned oscillator circuit

? Power supply decoupling internal

? No internal PLL avoids cascading PLL problems

? Low power consumption

? Gold plated leads - Solder dipped leads available upon request