S-82B2A集成電路（IC）的電池管理規格書PDF中文資料

S-82B2A屬于集成電路（IC）的電池管理。由艾普凌科有限公司制造生產的S-82B2A電池管理電池管理 PMIC（電源管理集成電路）系列產品可用于電池相關的監測和控制功能，包括身份驗證、電池平衡、狀態監測、電量計量、電源選擇、短路保護、過壓和欠壓保護等等。請注意，雖然該系列中的某些產品可能包括電池充電功能，但將充電功能作為主要功能的產品是單獨分類的。

This IC is a protection IC for lithium-ion / lithium polymer rechargeable batteries, which includes high-accuracy voltage

detection circuits and delay circuits. It is suitable for protecting 2-serial-cell lithium-ion / lithium polymer rechargeable battery

packs from overcharge, overdischarge, and overcurrent.

Use of an external overcurrent detection resistor enables this IC to provide high-accuracy overcurrent protection with less

impact from temperature changes.

The S-82B2A Series has an input pin for charge-discharge control signal (CTL pin), allowing for charge-discharge control

with an external signal. The S-82B2B Series has an input pin for power-saving signal (PS pin), allowing for reduction of

current consumption by using an external signal to start the power-saving function.

Features

? High-accuracy voltage detection circuit

Overcharge detection voltage n 3.500 V to 4.800 V (5 mV step) Accuracy ±20 mV

Overcharge release voltage n 3.100 V to 4.800 V*1 Accuracy ±50 mV

Overdischarge detection voltage n 2.000 V to 3.000 V (10 mV step) Accuracy ±50 mV

Overdischarge release voltage n 2.000 V to 3.400 V*2 Accuracy ±75 mV

Discharge overcurrent 1 detection voltage 3 mV to 100 mV (0.5 mV step) Accuracy ±3.0 mV

Discharge overcurrent 2 detection voltage 10 mV to 100 mV (1 mV step) Accuracy ±5 mV

Load short-circuiting detection voltage 20 mV to 100 mV (1 mV step) Accuracy ±10 mV

Charge overcurrent detection voltage ?100 mV to ?3 mV (0.5 mV step) Accuracy ±3.0 mV

? Detection delay times are generated only by an internal circuit (external capacitors are unnecessary).

? Charge-discharge control function (S-82B2A Series)

CTL pin control logic: Active H, active L

CTL pin internal resistance connection: Pull-up, pull-down

CTL pin internal resistance value: 1 MΩ to 10 MΩ (1 MΩ step)

? Power-saving function (S-82B2B Series)

PS pin control logic: Active H, active L

PS pin internal resistance value: 1 MΩ to 10 MΩ (1 MΩ step)

? 0 V battery charge: Enabled, inhibited

? Power-down function: S-82B2A Series: Available, unavailable

S-82B2B Series: Available

? High-withstand voltage: VM pin and CO pin: Absolute maximum rating 28 V

? Wide operation temperature range: Ta = ?40°C to +85°C

? Low current consumption

During operation: 3.0 μA typ., 6.0 μA max. (Ta = +25°C)

During power-down: 50 nA max. (Ta = +25°C)

During overdischarge: 1.0 μA max. (Ta = +25°C)

During power-saving (S-82B2B Series): 50 nA max. (Ta = +25°C)

? Lead-free (Sn 100), halogen-free

Applications

? Lithium-ion rechargeable battery pack

? Lithium polymer rechargeable battery pack