S-8261AAJBD-G2J-TF中文資料精工愛普生數(shù)據(jù)手冊(cè)PDF規(guī)格書

The S-8261 series are lithium-ion / lithium polymer rechargeable battery protection ICs incorporating high accuracy voltage detection circuit and delay circuit. The S-8261 series are suitable for protection of single-cell lithium ion/lithium polymer battery packs from overcharge, overdischarge and overcurrent.

Features

(1) Internal high accuracy voltage detection circuit

? Overcharge detection voltage 3.9 V to 4.4 V (applicable in 5 mV step)

Accuracy: ±25 mV (+25 °C) and ±30 mV (?5 °C to +55 °C)

? Overcharge hysteresis voltage 0.0 V to 0.4 V*1 Accuracy: ±25 mV

The overcharge hysteresis voltage can be selected from the range 0.0 V to 0.4 V in 50 mV step.

? Overdischarge detection voltage 2.0 V to 3.0 V (applicable in 10 mV step) Accuracy: ±50 mV

? Overdischarge hysteresis voltage 0.0 V to 0.7 V*2 Accuracy: ±50 mV

The overdischarge hysteresis voltage can be selected from the range 0.0 V to 0.7 V in 100 mV step.

? Overcurrent 1 detection voltage 0.05 V to 0.3 V (applicable in 10 mV step) Accuracy: ±15 mV

? Overcurrent 2 detection voltage 0.5 V (fixed) Accuracy: ±100 mV

(2) High voltage device is used for charger connection pins

(VM and CO pins: absolute maximum rating = 28 V)

(3) Delay times (overcharge: tCU, overdischarge: tDL, overcurrent 1: tlOV1, overcurrent 2: tlOV2) are generated

by an internal circuit. No external capacitor is necessary. Accuracy: ±20

(4) Three-step overcurrent detection circuit is included.

(overcurrent 1, overcurrent 2 and load short-circuiting)

(5) 0 V battery charge function “available” / “unavailable” are selectable.

(6) Charger detection function and abnormal charge current detection function

? The overdischarge hysteresis is released by detecting negative voltage at the VM pin (?0.7 V typ.).

(Charger detection function)

? When the output voltage of the DO pin is high and the voltage at the VM pin is equal to or lower than the charger detection voltage (?0.7 V typ.), the output voltage of the CO pin goes low. (Abnormal charge current detection function)

(7) Low current consumption

? Operation mode 3.5 μA typ., 7.0 μA max.

? Power-down mode 0.1 μA max.

(8) Wide operating temperature range ?40 °C to +85 °C

(9) Small package SOT-23-6, 6-Pin SNB(B)

*1. Overcharge release voltage = Overcharge detection voltage ? Overcharge hysteresis voltage

(where overcharge release voltage < 3.8 V is prohibited.)

*2. Overdischarge release voltage = Overdischarge detection voltage + Overdischarge hysteresis voltage

(where overdischarge release voltage > 3.4 V is prohibited.)

Applications

? Lithium-ion rechargeable battery packs

? Lithium polymer rechargeable battery packs