RTL2832U中文資料瑞昱數據手冊PDF規格書

General Description

The RTL2832U is a high-performance DVB-T COFDM demodulator that supports a USB 2.0 interface.

The RTL2832U complies with NorDig Unified 1.0.3, D-Book 5.0, and EN300 744 (ETSI Specification).

It supports 2K or 8K mode with 6, 7, and 8MHz bandwidth. Modulation parameters, e.g., code rate, and

guard interval, are automatically detected.

The RTL2832U supports tuners at IF (Intermediate Frequency, 36.125MHz), low-IF (4.57MHz), or

Zero-IF output using a 28.8MHz crystal. Embedded with an advanced ADC (Analog-to-Digital

Converter), the RTL2832U features high stability in portable reception.

Features

COFDM complying with Nordig Unified

1.0.3, D-book 5.0, and ETSI 300-744

Supports multiple IF frequencies (4.57MHz

or 36.167MHz) and spectrum inversion

Supports Zero-IF input

Single low-cost crystal for clock generation

(±100ppm)

Automatic transmission mode and guard

interval detection

Impulse noise cancellation circuits

Automatic carrier recovery over a wide

range offset (±800KHz)

Superior performance with pre/post/long

echo profiles

Embedded adjacent and co-channel

interference rejection circuit

Delayed AGC with programmable

Take-Over Point (TOP)

7-bit ADC for RF signals level measurement

Hardware MPEG-2 PID filters

Infra-red port for remote control and

wake-up, protocols supported are

Microsoft RC6 protocol

NEC, Sony, SIRC, RC-5 protocol

Eight general purpose I/O ports

USB 2.0 Interface

Supports USB Full/High speed

Configurable vendor information via

external EEPROM

Passes USB-IF certification

Signal 3.3V external power is required

48-pin QFN (6x6 mm2

) Green Package

3. System Applications

Portable DTV device

USB dongle

MiniCard