RCLAMP052XP中文資料友臺半導體數(shù)據(jù)手冊PDF規(guī)格書

Description

RClamp arrays are ultra low capacitance ESD

protection devices designed to protect high speed data

interfaces. This series has been specifically designed to

protect sensitive components which are connected to

high-speed data and transmission lines from overvoltage

caused by ESD (electrostatic discharge), CDE

(Cable Discharge Events), and EFT (electrical fast

transients).

The RClamp0522P and RClamp0524P have a

typical capacitance of only 0.30pF between I/O pins.

This allows it to be used on circuits operating in excess

of 3GHz without signal attenuation. They may be used

to meet the ESD immunity requirements of IEC 61000-

4-2. The RClamp0522P is designed to protect two

lines, while the RClamp0524P will protect four lines.

The RClamp0522P is in a 6-pin SLP1610P4 package. It

measures 1.6 x 1.0 with a nominal height of 0.58mm.

The RClamp0524PA is in a 10-pin SLP2510P8 package.

It measures 2.5 x 1.0 with a nominal height of 0.58mm.

The leads are spaced at a pitch of 0.5mm and are finished

with lead-free NiPdAu. They are designed for easy

PCB layout by allowing the traces to run straight through

the device. The combination of small size, low capacitance,

and high level of ESD protection makes them a

flexible solution for applications such as HDMI,

DisplayPortTM, MDDI, and eSATA interfaces.

Features

ESD protection for high-speed data lines to

IEC 61000-4-2 (ESD) ±17kV (air), ±12kV (contact) IEC

61000-4-5 (Lightning) 5A (8/20μs)

IEC 61000-4-4 (EFT) 40A (5/50ns)

Package design optimized for high speed lines

Flow-Through design

Protects two or four I/O lines

Low capacitance: 0.3pF typical (I/O to I/O)

Low clamping voltage

Low operating voltage: 5V

Solid-state silicon-avalanche technology

Applications

High Definition Multi-Media Interface (HDMI)

Digital Visual Interface (DVI)

DisplayPortTM Interface

MDDI Ports

PCI Express

eSATA Interfaces