POPT4001YMNRQ1中文資料德州儀器數(shù)據(jù)手冊(cè)PDF規(guī)格書

1 Features

? AEC-Q100 qualified for automotive applications:

– Temperature grade 1 (PicoStar? variant): –

40°C to 125°C, TA

– Temperature grade 2 (USON variant): –40°C to

105°C, TA

? Functional Safety-Capable

– Documentation available to aid functional safety

system design

? High-precision, high-speed light-to-digital

conversion over high-speed I2C interface

? Precision optical filtering closely matches human

eye with excellent near infrared (NIR) rejection

? Semi-logarithmic output:

– Nine binary logarithmic full-scale light range

– Highly linear response within each range

? Built-in automatic full-scale light range selection

logic, which switches measurement range based

on input light condition for best possible resolution

at all times

? 28 bits of effective dynamic range:

– 312.5μlux to 83klux for PicoStar? package

variant

– 400μlux to 107klux for USON package variant

? 12 configurable conversion times:

– 600μs to 800ms for high-speed and highprecision

applications

? External pin interrupt for hardware-synchronized

trigger and interrupts (only on USON package

variant)

? Error correction code features for improved

reliability in automotive use cases

? Internal FIFO for output registers with I2C burst

readout

? Low operating current: 30μA

? Ultra-low power standby: 2μA

? Wide power-supply range: 1.6V to 3.6V

? 5.5V tolerant I/O pins

? Selectable I2C address

? Small-form factor:

– PicoStar?: 0.84mm x 1.05mm x 0.226mm

– USON: 2mm x 2mm x 0.65mm

2 Applications

? Automotive interior and exterior lighting

? Infotainment and clusters

? Electrochromatic and smart mirrors

? Wiper modules

? Head-up display systems

? Automotive camera systems

3 Description

The OPT4001-Q1 is a light-to-digital sensor (single-chip lux meter) that measures the intensity of visible light.

To measure accurate light intensity, a specially engineered filter on the device tightly matches the photopic

response of the human eye and rejects the near-infrared component from common light sources. The output of

the OPT4001-Q1 is semi-logarithmic with nine binary logarithmic full-scale light ranges along with a highly linear

response within each range, bringing capability to measure from 312.5μlux to 83klux for the PicoStar? variant

and 400μlux to 107klux for the USON variant. This capability allows the light sensor to have a 28-bit effective

dynamic range. The built-in automatic range-selection logic dynamically adjusts the device gain settings based

on the light level, providing the best possible resolution in all conditions without user input.

The engineered optical filter on the OPT4001-Q1 provides strong near infrared (NIR) rejection. This filter aids in

maintaining high accuracy when the sensor is placed under dark glass for aesthetic reasons.

The OPT4001-Q1 is designed for systems that require light level detection to enhance user experience

and typically replaces low-accuracy photodiodes, photoresistors, and other ambient light sensors with

underwhelming human eye matching and near-infrared rejection.

The OPT4001-Q1 can be configured to operate with light conversion times from 600μs to 800ms in 12 steps,

providing system flexibility based on application need. Conversion time includes the light integration time

and analog-to-digital (ADC) conversion time. Measurement resolution is determined by a combination of light

intensity and integration time, effectively providing the capability to measure down to 312.5μlux of light intensity

changes for the PicoStar? variant and 400μlux of light intensity changes for the USON variant.

Digital operation is flexible for system integration. Measurements can be either continuous or triggered in one

shot with register writes or a hardware pin (hardware pin only available on USON variant). The device features a

threshold detection logic, which allows the processor to sleep while the sensor waits for an appropriate wake-up

event to report through the interrupt pin (only on USON variant).

The sensor reports a digital output representing the light level over an I2C- and SMBus-compatible, two-wire

serial interface. An internal first-in-first-out (FIFO) on the output registers is available to read out measurements

from the sensor at a slower pace while still preserving all data captured by the device. The OPT4001-Q1 also

supports I2C burst mode, thus helping the host read data from the FIFO with minimal I2C overhead.

The low power consumption and low power-supply voltage capability of the OPT4001-Q1 helps enhance the

battery life of battery-powered systems.