PM7342中文資料PMC數據手冊PDF規格書

FEATURES

IMA

? Supports up to 32 T1, E1, G.SHDSL or unchannelized links and up to 32 IMA groups with 1 to 32 links/group.

? Link and Group State Machines implemented on-chip requiring no real time software in the data path.

? Fully compliant with the ATM Forum Inverse Multiplexer for ATM (IMA) 1.1 specification and backward compatible to IMA 1.0.

? Supports both independent transmit clock (ITC) and common transmit clock (CTC) modes.

? Supports all IMA Group Symmetry modes: Symmetric/Asymmetric configuration and operation.

? Differential delay tolerance of 279 ms (for T1 links) and 226 ms (for E1 links).

? Performs IMA differential delay calculation and synchronization.

? Provides programmable limit on allowable differential delay and minimum number of links per group.

? Performs ICP and stuff-cell insertion and removal.

? Supports IMA frame length (M) equal to 32, 64, 128, or 256.

? Provides IMA layer statistic counts and alarms for support of IMA Performance and Failure Alarm Monitoring and MIB support.

? Provides per link counters for statistics and performance monitoring.

UNI

? Each link is software configurable as either a UNI or part of an IMA group.

? Performs receive cell Header Error Check (HEC) checking and transmit cell HEC generation.

? Optionally supports receive cell payload unscrambling and transmit cell payload scrambling.

? Provides TC layer statistics counts and alarms for MIB support.

ATM OVER FRACTIONAL T1/E1

? Supports ATM over Fractional T1/E1 compliant with the ATM Forum AF-PHY-0130.00 specification.

LINE INTERFACE

? 32 T1, E1, G.SHDSL or unchannelized links via 2-pin line interfaces.

? Supports a 19.44 MHz Scalable Bandwidth Interconnect (SBI) bus interface for seamless interconnect to the PM8315 TEMUX and PM8316 TEMUX-84.

? SBI supports two Synchronous Payload Envelopes (SPE). Each SPE can carry up to 16 T1s or 16 E1s.

UTOPIA / ANY-PHY INTERFACE

? Supports 8- and 16-bit UTOPIA L2 and Any-PHY cell interfaces at clock rates up to 52 MHz.

? Any-PHY transmit slave appears as a 32 port multi-PHY. The PHY-ID of each cell is identified using in-band addressing.

? Any-PHY receive slave appears as a single device. The PHY-ID of each cell is identified using in-band addressing.

? UTOPIA L2 transmit and receive slave appears as a 31-port multi-PHY.

? UTOPIA L2 receive slave can also appear as a single port with the logical port provided as a prepend.

GENERAL

? 16-bit interface for 1M x 16 SDRAM.

? Provides a 16-bit microprocessor interface for configuration, statistics gathering and Link and Unit Management.

? Provides a standard 5-pin P1149 JTAG port.

? Low-power 1.8 V CMOS with TTLcompatible I/O.

? 416-pin plastic ball grid array (PBGA) package.

APPLICATIONS

? Multiservice Switches.

? Optical Access Switches.

? DSLAMs.

? Wireless Basestation Controllers.

? Access Concentrators.