PM25LV010中文資料PMC數(shù)據(jù)手冊PDF規(guī)格書

GENERAL DESCRIPTION

The Pm25LV512/010 are 512 Kbit/1 Mbits 3.0 Volt-only serial Flash memories. These devices are designed to use a single low voltage, range from 2.7 Volt to 3.6 Volt, power supply to perform read, erase and program operations. The devices can be programmed in standard EPROM programmers as well.

The device is optimized for use in many commercial applications where low-power and low-voltage operation are essential. The Pm25LV512/010 is enabled through the Chip Enable pin (CE#) and accessed via a 3-wire interface consisting of Serial Data Input (Sl), Serial Data Output (SO), and Serial Clock (SCK). All write cycles are completely self-timed.

FEATURES

? Single Power Supply Operation

- Low voltage range: 2.7 V - 3.6 V

? Memory Organization

- Pm25LV512: 64K x 8 (512 Kbit)

- Pm25LV010: 128K x 8 (1 Mbit)

? Cost Effective Sector/Block Architecture

- Uniform 4 Kbyte sectors

- Uniform 32 Kbyte blocks (8 sectors per block)

- Two blocks with 32 Kbytes each (512 Kbit)

-Four blocks with 32 Kbytes each (1 Mbit)

- 128 pages per block

? Serial Peripheral Interface (SPI) Compatible

- Supports SPI Modes 0 (0,0) and 3 (1,1)

? High Performance Read

- 25 MHz clock rate (maximum)

? Page Mode for Program Operations

- 256 bytes per page