PCF8562集成電路（IC）的顯示驅(qū)動器規(guī)格書PDF中文資料

GENERAL DESCRIPTION

The PCF8562 is a peripheral device which interfaces to almost any Liquid Crystal Display (LCD) with low multiplex rates. It generates the drive signals for any static or multiplexed LCD containing up to four backplanes and up to 32 segments. The PCF8562 is compatible with most microprocessors/microcontrollers and communicates via a two-line bidirectional I2C-bus. Communication overheads are minimized by a display RAM with auto-incremental addressing, by hardware subaddressing and by display memory switching (static and duplex drive modes).

FEATURES

? Single-chip LCD controller/driver

? Selectable backplane drive configuration: static or 2/3/4 backplane multiplexing

? Selectable display bias configuration: static, 1/2 and 1/3

? Internal LCD bias generation with voltage-follower buffers

? 32 segment drives: up to sixteen 8-segmentnumeric characters; up to eight 15-segment alphanumeric characters; or any graphics of up to 128 elements

? 32 × 4-bit RAM for display data storage

? Auto-incremental display data loading across device subaddress boundaries

? Display memory bank switching instatic and duplex drive modes

? Versatile blinking modes

? Independent supplies possible for LCD and logic voltages

? Wide power supply range: from 1.8 to 5.5 V

? Wide logic LCD supply range: from 2.5 V for low-threshold LCDs and up to 6.5 V for guest-host LCDs and

high-threshold (automobile) twisted nematic LCDs

? Low power consumption

? 400 kHz I2C-bus interface

? TTL/CMOS compatible

? Compatible with 4, 8 or 16-bit microprocessorsor microcontrollers

? No external components

? Compatible with chip-on-glass technology

? Manufactured in silicon gate CMOS process.