GENERAL DESCRIPTION

Overview

The OM5193H is a combination of a voice coil motor and a spindle motor driver with embedded servo controller designed for use in disk drives. Configuration and control registers are set via a 3-wire serial port running up to 30 MHz to interface commonly to a microcontroller or a digital signal processor.

The device operates at 5 and 12 V power supplies and integrates safety functions such as power stages overvoltage protection, power and temperature monitor, over-temperature shutdown and dynamic brake-after-park.

The device is contained in a QFP80 package with 18 pins connected to the leadframe thus providing low thermal resistance.

FEATURES

Servo control

? 10-bit VCM Digital-to-Analog Converter (DAC)

? 7-channel 10-bit Analog-to-Digital Converter (ADC)

? Programmable spindle commutation control logic

? 3-wire serial interface

? Two stand-alone operational amplifiers (op-amps) with outputs connected to the ADC

? Analog multiplexer with two inputs used to select VCM seek mode or track-following mode.

Motor control

SPINDLE MOTOR DRIVER

? 3-phase output motor driver

? 1.9 A maximum available start-up current

? Total Rds(on) = 0.6 ? (typical) at 25 °C

? Back ElectroMotive Force (BEMF) processing for sensorless motor commutation

? Linear current control

? External current sense resistor

? External current control loop compensation

? Adjustable slew rate control

? Short-circuit brake

? Adjustable brake-after-park delay time.

VOICE COIL MOTOR DRIVER

? 1.5 A maximum current capability

? Total Rds(on) = 0.8 ? (typical) at 25 °C

? Linear class AB output with low cross-over distortion delay

? Precision current control loop with external current sense resistor

? Programmable seek and track-following mode with adjustable current loop gain

? External current control loop compensation

? Precharge during brake mode

? 20 kHz current control loop bandwidth

? Parking function

? Adjustable park voltage with limiter.

Miscellaneous items

? Precision low voltage 5 and 12 V power monitor with hysteresis

? Precision internal voltage reference for servo and power control circuits

? Thermal sense circuit with over-temperature shutdown sensor

? Internal charge pump voltage generator

? Automatic brake-after-park at power-down, thermal shutdown or sleep mode

? Sleep mode: low power consumption mode.

APPLICATIONS

? 12 V hard disk drive products.