General description

The NTS0304E is a 4-bit, dual supply translating transceiver family with auto direction

sensing, that enables bidirectional voltage level translation. It features eight 1-bit inputoutput ports (A and B), one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). VCC(A) can be supplied at any voltage between 0.95 V and 3.6 V. VCC(B) can be supplied at any voltage between 1.65 V and 5.5 V. This flexibility makes the device suitable for translating between any of the voltage nodes (0.95 V, 1.2 V, 1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins A and OE are referenced to VCC(A) and pin B is referenced to VCC(B). A LOW level at pin OE causes the outputs to assume a high-impedance OFF-state.

Features and benefits

? Wide supply voltage range:

– VCC(A): 0.95 V to 3.6 V and VCC(B): 1.65 V to 5.5 V

? No power-sequencing required

? Maximum data rate

– Open-drain: 2 Mbps

– Push-pull: 20 Mbps

? Longer one-shot pulse for driving larger capacitive loads with much reduced ringing

and overshoot

? A-side and OE inputs accept voltages up to 3.6 V and are 3.6 V tolerant

? B-side inputs accept voltages up to 5.5 V and are 5.5 V tolerant

? ESD protection:

– IEC 61000-4-2 Class 4, 8 kV contact for B-side port

– HBM JESD22-A114E Class 2 exceeds 2000 V for both ports

– CDM JESD22-C101E exceeds 1000 V for both ports

? Latch-up performance exceeds 100 mA per JESD 78B Class II

? Package options: TSSOP14 and WLCSP12

? Specified from -40 °C to +125 °C

NTS0304E屬于開發板，套件，編程器 > 評估板 - 擴展板，子卡。恩智浦半導體公司制造生產的NTS0304E評估板 - 擴展板，子卡評估和擴展板及子卡用于向微控制器平臺添加功能，它們可以堆疊到現有針座或預配置的附件端口上。常見功能類型包括放大器、霧化器、音頻、時鐘定時、接口連接性、數據獲取/記錄、顯示、人機界面、存儲器、電機驅動器、光電器件、電源管理、原型設計、繼電器和晶體管、RF 和傳感器陣列。