NCP12400BAHAB0DR2G集成電路（IC）的ACDC轉換器離線開關規格書PDF中文資料

NCP12400BAHAB0DR2G屬于集成電路（IC）的ACDC轉換器離線開關。由安森美半導體公司制造生產的NCP12400BAHAB0DR2GAC DC 轉換器，離線開關該系列是元器件級控制產品，用于構建將交流市電轉換為直流電（通常電壓大幅降低）的設備。集成和未集成系統主要開關元件的器件均包括在內。由于高輸入輸出電壓比，以及此類系統中通常需要隔離，這些器件通常與外部變壓器配合使用。盡管通常使用定制變壓器來實現此用途，但也有許多專門用于此用途的庫存產品，請參見“開關轉換器，SMPS 變壓器”標題。

The NCP12400 is a new fixed?frequency current?mode controller

featuring the Dynamic Self?Supply. This function greatly simplifies

the design of the auxiliary supply and the VCC capacitor by activating

the internal startup current source to supply the controller during

start?up, transients, latch, stand?by etc. This device contains a special

HV detector which detects the application unplug from the ac input

line and triggers the X2 discharge current. This HV structure allows

the brown?out detection as well.

It features a timer?based fault detection that ensures the detection of

overload and an adjustable compensation to help keep the maximum

power independent of the input voltage.

Due to frequency foldback, the controller exhibits excellent

efficiency in light load condition while still achieving very low

standby power consumption. Internal frequency jittering, ramp

compensation, and a versatile latch input make this controller an

excellent candidate for the robust power supply designs.

A dedicated Off Mode allows to reach the extremely low no load

input power consumption via “sleeping” whole device and thus

minimize the power consumption of the control circuitry.

Features

? Fixed?Frequency Current?Mode Operation 65 kHz or 100 kHz

Frequency Options

? Frequency Foldback then Skip Mode for Maximized Performance

in Light Load and Standby Conditions

? Timer?Based Overload Protection with Latched (Option A) or

Autorecovery (Option B) Operation

? High?Voltage Current Source with Brown?Out Detection and

Dynamic Self?Supply, Simplifying the Design of the VCC Circuitry

? Frequency Modulation for Softened EMI Signature

? Adjustable Overpower Protection Dependant on the Mains Voltage

? Fault Input for Overvoltage and Over Temperature Protection

? VCC Operation up to 28 V, with Overvoltage Detection

? 300/500 mA Source/Sink Drive Peak Current Capability

? 4/10 ms Soft?Start

? Internal Thermal Shutdown

? No?Load Standby Power < 30 mW

? X2 Capacitor in EMI Filter Discharging Feature

? These are Pb?Free Devices

Typical Applications

? Offline Adapters for Notebooks, LCD, and Printers

? Offline Battery Chargers

? Consumer Electronic Power Supplies

? Auxiliary/Housekeeping Power Supplies

? Offline Adapters for Notebooks