MPI-8080中文資料BOSER數據手冊PDF規格書

Features

* Input Voltage: 85~264VAC

* Input Frequency: 47~63Hz

* Input Current: 3A at 115VAC or 1.5A at 230VAC max. capacitors

* Inrush Current: Does not exceed 30A at 115VAC input or 60A at 230VAC input, cold start at 25°C

* Load Regulation: With +5V output set between 4.95~5.05V and all output at 60 rated load, and all other outputs in the accuracy range, max. load can not > 80W convection cooling and > 100W forced air cooling

* Ripple And Noise: Peak to peak ripple and noise for each output is < 1 of each output voltage at rated load

* Line Regulation: < +/-1 at rated load with +/-10 change in input voltage

* Load Regulation: < +/-1 for +5V, < +/-5 for other outputs with +/-40 change in measured output loading from 60 rated load and other outputs at 60 rated laod

* Hold Up Time: > 16ms at 115VAC input and rated load

* Efficiency: > 70 at nominal line and rated load

* Altitude: 10,000 feet

* Protection:

Short Circuit: Hiccup mode against short circuit or over load conditions auto recovery to normal after wrong conditions are removed Output: Built-in crowbar circuit shuts down outputs to avoid damage. Trip point of over voltage protection is between 5.7~7.0V AC line ON/OFF restarts and recovers the unit from over voltage protection

* Temperature: 0~+50°C, requires forces air of 30CFM for outputs > 80W (operating); -20~+70°C (storage)

* Humidity: 5~95; non-condensing at 40°C (operating)

* Dimensions: 15.24 x 8.38 x 3.8 cm within +/-0.4mm tolerance

* MTBF: 283,179 hrs.