MG75P中文資料沖電線數(shù)據(jù)手冊PDF規(guī)格書

DESCRIPTION

Oki’s 0.25μm Application-Specific Integrated Circuit (ASIC) products are available in both Sea Of Gates (SOG) and Customer Structured Array (CSA) architectures. Both the SOG-based MG115P series and the CSA-based MG75P series use a five-layer metal process on 0.25μm drawn (0.18μm L-effective) CMOS technology. The SOG MG113P/114P series uses the same SOG base-array architecture as the MG115P series, but offers four and three metal layers, respectively. The MG73P/74P CSA series uses three and four metal layers, respectively. The semiconductor process is adapted from Oki’s production-proven 64-Mbit DRAM manufacturing process.

FEATURES

? 0.25μm drawn 3-, 4-, and 5-layer metal CMOS

? Optimized 2.5-V core

? Optimized 3-V I/O

? SOG and CSA architecture availability

? 77-ps typical gate propagation delay (for a 4x drive inverter gate with a fanout of 2 and 0 mm of wire, operating at 2.5 V)

? Over 5.4M raw gates and 868 I/O pads using 60μ staggered I/O

? User-configurable I/O with VSS, VDD, TTL, 3-state, and 1- to 24-mA options

? Slew-rate-controlled outputs for low-radiated noise

? H-clock tree cells which reduces the maximum skew for clock signals

? Low 0.2μW/MHz/gate power dissipation

? User-configurable single- and dual-port memories

? Specialized IP cores and macrocells including 32-bit ARM7TDMI CPU, phase-locked loop (PLL), and peripheral component interconnect (PCI) cells

? Floorplanning for front-end simulation, back end layout controls, and link to synthesis

? Joint Test Action Group (JTAG) boundary scan and scan path Automatic Test Pattern Generation (ATPG)

? Support for popular CAE systems including Cadence, IKOS, Mentor Graphics, Model Technology, Inc. (MTI), Synopsys, and Viewlogic