MCH1214OD中文資料摩托羅拉數(shù)據(jù)手冊(cè)PDF規(guī)格書

Phase-Frequency Detector

The MCH/K12140 is a phase frequency-detector intended for phase-locked loop applications which require a minimum amount of phase and frequency difference at lock. When used in conjunction with the MC12147, MC12148 or MC12149 VCO, a high bandwidth PLL can be realized. The device is functionally compatible with the MC12040 phase-frequency detector, however the MOSAIC? III process is used to push the maximum frequency to 800 MHz and significantly reduce the dead zone of the detector. When the Reference (R) and VCO (V) inputs are unequal in frequency and/or phase, the differential UP (U) and DOWN (D) outputs will provide pulse streams which when subtracted and integrated provide an error voltage for control of a VCO.

The device is packaged in a small outline, surface mount 8-lead SOIC package. There are two versions of the device to provide I/O compatibility to the two existing ECL standards. The MCH12140 is compatible with MECL10H? logic levels while the MCK12140 is compatible to 100K ECL logic levels. This device can also be used in +5.0 V systems. Please refer to Motorola Application Note AN1406/D, “Designing with PECL (ECL at +5.0 V)” for more information.

? 800 MHz Typical Bandwidth

? Small Outline 8-Lead SOIC Package

? 75 k? Internal Input Pulldown Resistors

? >1000 V ESD Protection

For proper operation, the input edge rate of the R and V inputs should be less than 5ns.