MC9S08DV128F2VLF中文資料飛思卡爾數據手冊PDF規格書

Device Overview

MC9S08DZ128 Series devices are members of the low-cost, high-performance HCS08 Family of 8-bit microcontroller units (MCUs). All MCUs in the family use the enhanced HCS08 core and are available with a variety of modules, memory sizes, memory types, and package types.

MC9S08DZ128 Series Features

8-Bit HCS08 Central Processor Unit (CPU)

? 40-MHz HCS08 CPU (20-MHz bus)

? HC08 instruction set with added BGND instruction

? Support for up to 32 interrupt/reset sources

On-Chip Memory

? FLASH read/program/erase over full operating voltage and temperature

? EEPROM in-circuit programmable memory; 8-byte single-page or 4-byte dual-page erase sector; Program and Erase while executing FLASH; Erase abort

? Random-access memory (RAM)

Power-Saving Modes

? Two very low power stop modes

? Reduced power wait mode

? Very low power real time interrupt for use in run, wait, and stop

Clock Source Options

? Oscillator (XOSC) — Loop-control Pierce oscillator; Crystal or ceramic resonator range of 31.25 kHz to 38.4 kHz or 1 MHz to 16 MHz

? Multi-purpose Clock Generator (MCG) — PLL and FLL modes; reference clock with nonvolatile trim (0.2 resolution, 1.5 tolerance over temperature with internal temperature compensation); External reference with oscillator/resonator options

System Protection

? Watchdog computer operating properly (COP) reset with option to run from backup dedicated 1-kHz internal clock source or bus clock; with optional windowed operation

? Low-voltage detection with reset or interrupt; selectable trip points

? Illegal opcode detection with reset

? Illegal address detection with reset

? FLASH and EEPROM block protect

? Loss-of-lock protection

Development Support

? Single-wire background debug interface

? On-chip, in-circuit emulation (ICE) with real-time bus capture

Input/Output

? Up to 87 general-purpose input/output (I/O) pins and 1 input-only pin

? Up to 32 interrupt pins with selectable polarity on each pin

? Hysteresis and configurable pull device on all input pins.

? Configurable slew rate and drive strength on all output pins.

Package Options

? 100-pin low-profile quad flat-pack(LQFP) — 14x14 mm

? 64-pin low-profile quad flat-pack (LQFP) — 10x10 mm

? 48-pin low-profile quad flat-pack (LQFP) — 7x7 mm