MB91F191A中文資料富士通數(shù)據(jù)手冊PDF規(guī)格書

■ DESCRIPTION

The MB91191/192 series is a single-chip microcontroller using a 32-bit RISC-CPU (FR series) as its core. It contains peripheral I/O resources suitable for software servo control in applications such as VTRs that require high-speed CPU processing.

■ FEATURES

CPU

? 32-bit RISC (FR series) , load/store architecture, 5-stage pipeline

? General-purpose registers : 16 × 32-bit

? 16-bit fixed-length instructions (basic instructions) , 1 instruction per cycle

? Includes memory-to-memory transfer, bit manipulation, and barrel shift instructions : Optimized for embedded applications

? Includes function entry/exit instructions and multiple-register load/store instructions : Instruction set supports high level languages

? Register interlock function : For efficient assembly language coding

? Branch instructions with delay slots : Reduced overhead for branch operations

? Internal multiplier unit is supported at instruction level

Signed 32-bit multiplication : 5 cycles

Signed 16-bit multiplication : 3 cycles

? Interrupts (PC and PS saving) : 6 cycles, 16 priority levels

Bus Interface

? 16-bit address output, 8/16-bit data input and output

? Basic bus cycle : 2 clock cycles

? Supports interfaces for various types of memory

? Multiplexed data/address input/output

? Automatic wait cycles : Between 0 and 7 wait cycles can be specified independently for each memory area

? Unused data/address pins can be configured as input/output ports

? Supports little endian mode

Bit Search Module

? Searches, starting from the MSB, for the position of the first 1/0 bit transition in a word. The operation is performed in one cycle.

Serial I/O

? 3 channels with internal buffer RAM (automatic transfer of up to 128 bytes)

? Independent send and receive buffer mode (automatic transfer of up to 64 bytes)

A/D Converter (Successive Approximation Type)

? 10-bit × 16 channels

? Uses successive approximation conversion method (conversion time : 8.4 μs @ 20 MHz)

? Channel scan function

? Hardware and software conversion start functions

? Internal FIFO (Software conversion : 6 stages, Hardware conversion : 6 stages)

Timers

? 16-bit × 4 channels

? 16-bit timer/counter × 1 channel (with square wave output)

? 8/16-bit timer/counter × 1 channel (with square wave output)

FG input unit

? Incorporates capstan, drum, and reel input circuits

Capture unit

? Internal 24-bit free-run counter (Minimum resolution = 50 ns @ 20 MHz)

? Internal FIFO (Data : 21-bit × 8, Detection : 8-bit × 8)

Programmable pattern generator

? Internal RAM buffer (PPG0 : 256 bytes, PPG1 : 64 bytes)

? Output timing resolution : 800 ns @ 20 MHz

? Includes an A/D converter hardware start function

Realtime timing generator

? RTG : 3 circuits

? Output timing resolution : 400 ns or 800 ns selectable

? Timing output ports : 5 ports

PWM

? 12-bit PWM × 6 channels (rate, multi-type)

? Base frequency = 78.1 kHz or 39.0 kHz (@ 20 MHz) selectable

(Continued)