■ DESCRIPTION

The MB91265A series is a 32-bit RISC microcontroller designed by Fujitsu Microelectronics for embedded control applications which require high-speed processing.

The CPU is used the FR family* and the compatibility of FR60Lite.

MB91267NA/F267NA loads the C-CAN (1 channel) .

■ FEATURES

? FR60Lite CPU

? 32-bit RISC, load/store architecture with a five-stage pipeline

? Maximum operating frequency : 33 MHz (oscillation frequency 4.192 MHz,

oscillation frequency 8-multiplier PLL clock multiplication method)

? 16-bit fixed length instructions (basic instructions)

? Execution speed of instructions : 1 instruction per cycle

? Memory-to-memory transfer, bit handling, barrel shift instructions, etc.

: Instructions suitable for embedded applications

? Function entry/exit instructions, multiple-register load/store instructions

: Instructions adapted for C-language

? Register interlock function : Facilitates coding in assembler.

? Built-in multiplier with instruction-level support

? 32-bit multiplication with sign : 5 cycles

? 16-bit multiplication with sign : 3 cycles

? Interrupt (PC, PS save) : 6 cycles, 16 priority levels

? Harvard architecture allowing program access and data access

to be executed simultaneously

? Instruction compatible with FR family

? Internal peripheral functions

? A/D converter (sequential comparison type)

Resolution : 8/10 bits : 4 channels × 1 unit, 7 channels × 1 unit

Conversion time :

1.2 μs (Minimum conversion time system clock at 33 MHz)

1.35 μs (Minimum conversion time system clock at 20 MHz)

? External interrupt input : 8 channels

? Bit search module (for REALOS)

Function for searching the MSB (upper bit) in each word

for the first 1-to-0 inverted bit position

? C-CAN 32MSB : 1 channel (loaded in MB91267NA/F267NA)

? UART (Full-duplex double buffer) : 2 channels

Selectable parity On/Off

Asynchronous (start-stop synchronized) or clock-synchronous

communications selectable

Internal timer for dedicated baud rate (U-TIMER) on each channel

External clock can be used as transfer clock

Error detection function for parity, frame, and overrun errors

? 8/16-bit PPG timer : 8 channels (at 8-bit) / 4 channels (at 16-bit)

? Timing generator

? 16-bit reload timer : 3 channels

(with cascade mode, without output of reload timer 0)

? 16-bit free-run timer : 3 channels

? 16-bit PWC timer : 1 channel

? Input capture : 4 channels (interface with free-run timer)

? Output compare : 6 channels (interface with free-run timer)

? Waveform generator

Various waveforms which are generated by using output compare,

16-bit PPG timer 0, and 16-bit dead timer

? SUM of products macro

RAM :

instruction RAM (I-RAM) 256 × 16-bit

coefficient RAM (X-RAM) 64 × 16-bit

variable RAM (Y-RAM) 64 × 16-bit

Execution of 1 cycle MAC (16-bit × 16-bit + 40 bits)

Operation results are extracted rounded from 40 to 16 bits

? DMAC (DMA Controller) : 5 channels

Operation of transfer and activation by

internal peripheral interrupts and software

? Watchdog timer

? Low-power consumption mode

Sleep/stop function

? Package : LQFP-64

? Technology : CMOS 0.35 μm

? Power supply : 1-power supply (Vcc = 4.0 V to 5.5 V)