MAX3480BCPI集成電路（IC）的驅(qū)動(dòng)器接收器收發(fā)器規(guī)格書PDF中文資料

General Description

The MAX3480A/MAX3480B are electrically isolated RS-485/RS-422 data-communications interfaces. Transceivers, optocouplers, and a transformer are all included in one low-cost, 28-pin DIP package. A single +3.3V supply on the logic side powers both sides of the interface.

The MAX3480B features reduced-slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, allowing error-free data transmission at data rates up to 250kbps. The MAX3480A’s driver slew rate is not limited, allowing transmission rates up to 2.5Mbps.

These devices typically draw 180mA of quiescent supply current. The MAX3480B provides a low-power shut down mode in which it consumes only 0.2μA.

Drivers are short-circuit current limited and are protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high-impedance state. The receiver input has a fail-safe feature that guarantees a logic-high output if the input is open circuit.

The MAX3480A/MAX3480B typically withstand 1600VRMS (1 minute) or 2000VRMS (1 second). Their isolated inputs and outputs meet RS-485/RS-422 specifications.

Features

? Isolated Data Interface to 1600VRMS (1 minute)

? Slew-Rate-Limited Data Transmission (MAX3480B)

? High-Speed, Isolated, 2.5Mbps RS-485 Interface (MAX3480A)

? -7V to +12V Common-Mode Input Voltage Range

with Respect to Isolated Ground

? Single +3.3V Supply

? Current Limiting and Thermal Shutdown for

Driver Overload Protection

? Standard 28-Pin DIP Package

Applications

Isolated RS-485/RS-422 Data Interface

Transceivers for EMI-Sensitive Applications

Industrial-Control Local Area Networks

Automatic Test Equipment

HVAC/Building Control Networks