MA7024P3中文資料久昌科技數(shù)據(jù)手冊(cè)PDF規(guī)格書

GENERAL DESCRIPTION

MA7024 is an integrated Hall-Effect latch sensor with pull-up resistor designed for

electronic commutation of brush-less DC motor applications. The device is using HV BCD

process includes an on-chip Hall voltage generator for magnetic sensing, a comparator that

amplifies the Hall voltage, and a Schmitt trigger to provide switching hysteresis for noise

rejection, and open-collector output. An internal band-gap regulator is used to provide

temperature compensated supply voltage for internal circuits and allows a wide operating

supply range.

If a magnetic flux density larger than threshold Bop, OUT is turned on(low). The output

state is held until a magnetic flux density reversal falls below Brp causing OUT to be turned

off (high).

FEATURES

- 2.5V to 28V DC Operation Voltage

- Temperature Compensation

- Wide Operating Voltage Range

- Open-Drain Pre-Driver

- 25mA Maximum Sinking Output Current.

- Low Profile SOT23-3L and SIP-3L(TO-92S) Packages