MA7003ATA中文資料久昌科技數(shù)據(jù)手冊(cè)PDF規(guī)格書

GENERAL DESCRIPTION

MA7003 is a three-terminal Hall Effect sensor device with an output driver. The device is

using CMOS process includes an on-chip Hall voltage generator for magnetic sensing, a

comparator that amplifies the Hall voltage, and a Schmitt trigger to provide switching

hysteresis for noise rejection, and open-drain output, and an internal temperature

compensated circuit. This method reduces the offset voltage normally caused by device over

molding and thermal stress.

The output is switch with either north or South Pole of sufficient strength will turn the

output on (low). The output will be turned off (high) under no magnetic field. While the

magnetic flux density (B) is larger than operate point (Bop), the output will be turned on (low);

the output is latched until B is lower than release point (Brp) and then turned off (high).

FEATURES

- 1.65V to 5.5V Battery Operation

- Chopper Stabilized Technology

- Operation with North or South Pole

- High Sensitivity and High Stability of The Magnetic Switching Points

- Low Profile SOT23-3L, TSOT23-3L, SIP-3L(TO-92S) Packages