DESCRIPTION

The LX8382/8382A series ICs are positive regulators designed to provide 10A output current. All internal circuitry is designed to operate down to a 1V input-to-output differential, so the LX8382/82A can operate with greater efficiency than previously available devices. The dropout voltage for each product is fully specified as a function of load current. Dropout is guaranteed at a maximum of 1.4V for the LX8382 and 1.2V for the LX8382A at maximum output current, decreasing at lower load currents. Fixed versions are also available and specified in the Available Options table below. The LX8382/82A have 1 initial voltage reference accuracy and 2 over line, load and temperature.

The LX8382/82A series devices are pin-compatible with earlier 3-terminal regulators, such as the 117 series products. While a 10μF output capacitor is required on both input and output of these new devices, this capacitor is generally included in most regulator designs.

KEY FEATURES

■ THREE-TERMINAL ADJUSTABLE OR FIXED OUTPUT VOLTAGE

■ GUARANTEED < 1.4V HEADROOM AT 10A (LX8382)

■ GUARANTEED < 1.2V HEADROOM AT 10A (LX8382A)

■ OUTPUT CURRENT OF 10A MINIMUM

□ 0.015 LINE REGULATION

□ 0.15 LOAD REGULATION

■ EVALUATION BOARD AVAILABLE: REQUEST LXE9001 EVALUATION KIT

APPLICATIONS

■ PENTIUM? PROCESSOR APPLICATIONS

■ POST REGULATORS FOR SWITCHING POWER SUPPLIES

■ BATTERY CHARGERS

■ CONSTANT CURRENT REGULATORS

■ CYRIX? 6x86TM

■ AMD-K6TM

■ HIGH-CURRENT MICROPROCESSORS

LX8382-33屬于集成電路（IC） > 線性 + 開關穩壓器。美高森美公司制造生產的LX8382-33穩壓器 - 線性線性穩壓器用于提供穩定的輸出電壓，無論負載電流、輸入電壓或環境因素如何變化，這些輸出電壓通常都要保持不變。它們的工作原理要求輸入電壓維持在高于所需的輸出電壓，而且要超出某個最小量，并且在工作時會將輸入端的任何多余電壓轉換為熱量。對于大多數應用而言，雖然這種穩壓器的效率低于開關模式的穩壓器，但它們通常更適合對噪聲高度敏感的應用。