LMR36006-Q1中文資料德州儀器數(shù)據(jù)手冊PDF規(guī)格書

1 Features

? AEC-Q100-qualified for automotive applications:

– Temperature grade 1: –40°C to +125°C, TA

? Functional Safety-Capable

– Documentation available to aid functional safety

system design

? Designed for automotive applications

– Junction temperature range –40°C to +150°C

– Protection features: thermal shutdown, input

undervoltage lockout, cycle-by-cycle current

limit, hiccup short-circuit protection

– 0.2-V dropout with 0.6-A load (typical)

– ±1.5 reference voltage tolerance

– 3.3-V fixed-output voltage option available

? Suited for scalable power supplies

– Pin compatible with:

? LMR36015-Q1 (60 V, 1.5 A)

? LMR33620/30-Q1 (36 V, 2 A, or 3 A)

– 400-kHz, 2.1-MHz frequency options

? Integration reduces solution size and cost

– Small, 2-mm × 3-mm VQFN package with

wettable flanks

– Few external components

? Low power dissipation across load spectrum

– 94 efficiency at 400 kHz (12 VIN, 5 VOUT, 0.6

A)

– Increased light load efficiency in PFM

– Low operating quiescent current of 26 μA

? Optimized for ultra low EMI requirements

– Meets CISPR25 class 5 standard

– HotRod? package minimizes switch node

ringing

– Parallel input path minimizes parasitic

inductance

– Spread spectrum reduces peak emissions

? Create a custom design using the LMR36006-Q1

with the WEBENCH? Power Designer

2 Applications

? ADAS camera module

? Body control module

3 Description

The LMR36006-Q1 regulator is an easy-to-use,

synchronous, step-down DC/DC converter. With

integrated high-side and low-side power MOSFETs,

up to 0.6 A of output current is delivered over a wide

input voltage range of 4.2 V to 60 V. Tolerance goes

up to 66 V.

The LMR36006-Q1 uses peak-current-mode control

to provide optimal efficiency and output voltage

accuracy. Advanced high speed circuitry allows the

LMR36006-Q1 to regulate from an input of 20 V

to an output of 5 V at a fixed frequency of 2.1

MHz. Precision enable gives flexibility by enabling

a direct connection to the wide input voltage or

precise control over device start-up and shutdown.

The power-good flag, with built-in filtering and delay,

offers a true indication of system status eliminating

the requirement for an external supervisor.

The LMR36006-Q1 is in a HotRod? package which

enables low EMI, higher efficiency, and the smallest

package to die ratio. The device requires few external

components and has a pinout designed for simple

PCB layout. The small solution size and feature

set of the LMR36006-Q1 are designed to simplify

implementation for a wide range of end equipment.