ITG-1010

High Performance 3-axis Gyro for General Motion-Sensing Applications; ? X-, -Y, & Z-Axis angular rate sensors (gyros) on one integrated circuit\n? Angular rate sensors (gyros) with user-programmable full-scale-range of ±250°/sec, ±500°/sec, ±1000°/sec, or ±2000°/sec.\n? Low power consumption with both axes active: 3.2mA\n? 16-bit ADCs for digitizing sensor outputs\n? Programmable low-pass filters\n? FIFO buffers complete data set, reducing timing requirements on the system processor and saving power by letting the processor burst read the FIFO data, and then go into a low-power sleep mode while the device collects more data.\n? VDD supply voltage range of 1.71V to 3.45V\n? I2C and SPI interface\n? Small 3x3x0.9mm QFN package\n? RoHS and Green compliant\n;

Overview The ITG-1010 is a single-chip, digital-output, 3-axis MEMS gyro IC with programmable full-scale ranges of ±250, ±500, ±1000, and ±2000 degrees/sec (dps), which is useful for precision tracking of both fast and slow motions. Factory-calibrated initial sensitivity reduces production-line calibration requirements. The part’s on-chip FIFO simplifies system timing and lower system power consumption. The FIFO allows a system microcontroller to burst read the sensor data and then go to sleep while the ITG-1010 collects more data.\n Other industry-leading features include on-chip 16-bit ADCs, programmable digital filters, a precision clock with 1% variation from -40°C to 85°C, an embedded temperature sensor, and programmable interrupts. Parts are available with a Fast-Mode I2C serial interface, a VDD operating range of 1.71 to 3.6V, and a VDDIO voltage from 1.71V to 3.6V.\n By leveraging its patented and volume-proven InvenSense Fabrication platform, which integrates MEMS wafers with companion CMOS electronics through wafer-level bonding, InvenSense has driven the ITG-1010 package size down to a footprint of 3x3x0.9mm (QFN), while providing the highest performance, lowest noise, and the lowest cost semiconductor packaging to address a wide range of handheld consumer electronic devices. The device provides the highest robustness by supporting 10,000g shock in operation. The highest cross-axis isolation is achieved by design from its single silicon integration.\n

ETC

ITG-1010

MEMS gyroscope

ITG-1010

Package：16-VFQFN 裸露焊盤；包裝：卷帶（TR）剪切帶（CT）Digi-Reel? 得捷定制卷帶 類別：傳感器，變送器 運(yùn)動(dòng)傳感器 - 陀螺儀 描述：3-AXIS GYROSCOPE; LOW POWER SOLU

ETC

ITM1010

CDMACellular/CDMA450ReceiverRFFront-endIC

ITM1010EV

CDMACellular/CDMA450ReceiverRFFront-endIC

ITM1010TR

CDMACellular/CDMA450ReceiverRFFront-endIC

K1010

HighReliabilityPhotoCoupler

Features 1.Currenttransferratio(CTR：Min.50atIF=5mAVCE=5V) 2.Highisolationvoltagebetweeninputandoutput(Viso：5000Vrms) 3.Compactdual-in-linepackage. 4.PbfreeandRoHScompliant. 5.AgencyApprovals ?ULUL1577/CULC22.2No.1&NTCNo.5,FileNo.E1695

COSMO

K1010

HighReliabilityPhotocoupler

COSMO

K1010H

HighReliabilityPhotocoupler

COSMO

K1010L

HighReliabilityPhotocoupler

COSMO